Changing the player settings
Change the unit’s settings if necessary. The settings remain intact even if you switch the unit to standby.
Press SETUP.
Press e r to select the menu, and press q.
Press e r to select the item, and press q to confirm your selection.
Press e r to select the settings, and press OK.
• To return the previous menu, press w.
• To exit, press SETUP.
Operation methods other than the above procedure may be displayed. In that case, follow the
Depending on the type of media, this unit’s settings may be disabled.
SYSTEM
TV System
⇒This menu contains the options for selecting the color system that matches the connected TV.
NTSC
⇒It will change the video signal of a PAL contents and output it to NTSC format.
PAL
⇒It will change the video signal of an NTSC contents and output it to PAL format.
PAL60
⇒It will change the video signal of an NTSC contents and output it to PAL60 format.
Auto
⇒Select this if the connected TV is compatible with both NTSC and PAL.
Screen Saver
⇒This setting enables the Screen Saver to activate. Screen saver will start automatically if the media playback is stopped for about 5 minutes.
Resolution (DVD-S700 only)
⇒Select a video resolution that is compatible with the TV display capability.
Selecting “Auto” can automatically select the best resolution.
HDMI CEC (DVD-S700 only)
⇒When connecting this unit with the TV via the HDMI cable, linked operations with a connected device is possible.
TV Type
⇒Set the TV Type on the DVD player according to the TV you have connected.
4:3PS
⇒16:9 aspect images are enlarged in full screen with the both sides cut.
4:3LB
⇒16:9 aspect images are displayed with black bands on top and bottom.
16:9
⇒4:3 aspect images are displayed in the center of the screen.
16:9Full
⇒4:3 aspect images are stretched to right and left.
LANGUAGE
Display
⇒This switches the language for display menu.
Audio
⇒This switches the language for output audio.
Subtitle
⇒This switches the language for subtitle.
Menu
⇒This switches the language for disc menu.
AUDIO
Audio Out
⇒This sets the audio output method when connected to the “HDMI AV OUT” terminal.
Bitstream
⇒When the connected equipment is supporting Dolby Digital
PCM
⇒When the connected equipment is not supporting Dolby Digital
Dynamic Range
⇒Adjusts for clarity even when the volume is low through compressing the range of the lowest sound level and the highest sound level.
Operations
HDMI CEC protocol / Changing the player settings
VQT5C22
11