Panasonic TX-26LXD8A warranty Hdmi Functions, Setup, Select the external input, Select PC

Displaying PC Screen on TV

The screen of the PC connected to the TV can be displayed on the TV. You can also listen to PC sound with the audio cable connected.

•To connect PC p. 39

	INPUT	1	Select the external input
ASPECT		EXIT
	OK

MENU		RETURN	Select “PC”
		2
			Input Selection
	OPTION DIRECT TV REC		AV1
			AV2
			AV3
1	2	3	AV4
			PC
			HDMI1
4	5	6	HDMI2
			TV

7 8 9

0

access

select

•Corresponding signals (p. 42)

•If “H-freq.” or “V-freq.” is shown in red, the signals may not be supported.

•PC Audio input is via AV2 Audio connection. (p. 39)

To return to TV
PC menu setting (changed as desired)
•To make settings “How to Use Menu Functions” to				(p. 18)
Menu		Item	Adjustments / Configurations (options)
Picture		R-Gain	Adjusts the white balance for red areas
		G-Gain	Adjusts the white balance for green areas
	Advanced
	PC	B-Gain	Adjusts the white balance for blue areas
	Settings	Gamma	(2.0 / 2.2 / 2.5)
		Reset PC	Press the OK button to reset to the default Picture settings
		Settings
			Switches to a wide view
		Input	•VGA (640 × 480 pixels), WVGA (852 × 480 pixels),
		Resolution	XGA (1,024 × 768 pixels), WXGA (1,366 × 768 pixels)
			•Options change depending on signals
		Clock	Set to the minimum level if noise occurs
			Adjusts horizontal position
Setup		H-pos
	PC	V-pos	Adjusts vertical position
	Setup
			Eliminates flicker and distortion	•Set to the minimum level if noise occurs
		Clock Phase	•Adjust after Clock adjustment
			PC sync signal type (H & V / SOG)
		Sync	•H & V : Horizontal and Vertical sync from your PC (Most common sync format)
			SOG : Sync on Green sync from your PC
		Reset PC	Press the OK button to reset to the default Setup settings
		Settings

•Other items p. 20 and p. 21

HDMI Functions

HDMI (high-definition multimedia interface) allows you to enjoy high-definition digital images and high- quality sound by connecting the TV and the equipment.

HDMI-compatible equipment ( 1) with an HDMI or DVI output terminal, such as a set top box, a DVD player or a game equipment, can be connected to the HDMI terminal using an HDMI compliant (fully wired) cable.

About connections, see “External Equipment” (p. 38).

Note
•HDMI is the world’s first complete digital consumer AV interface complying with a non-compression standard.
•Audio settings can be made on the “HDMI1 Input” menu screen. (p. 20)
•Applicable audio signal sampling frequencies (2ch L.PCM): 48 kHz, 44.1 kHz, 32 kHz
•HDMI2 terminal is for digital audio signal only.
•Use with a PC is not guaranteed. Only HDMI video formats in page 42 HDMI table are applicable.
•If the connected equipment has an aspect adjustment function, set the aspect ratio to “16:9”.
•These HDMI connectors are “type A”.
•These HDMI connectors are compatible with HDCP (High-Bandwidth Digital Content Protection) copyright
protection.
•An equipment having no digital output terminal may be connected to the input terminal of either “COMPONENT”,
“S-VIDEO”, or “VIDEO” to receive analogue signals.
•The HDMI input terminal can be used with only the following image signals:							•
480i, 480p, 576i, 576p, 720p, 1080i and 1080p. Match the output setting of the digital equipment.
•For details of the applicable HDMI signals, see p. 42.								Displaying
DVI connection
•If the external equipment has only a DVI output, connect to the HDMI1 terminal via a DVI to HDMI adapter
cable (		2).						•
When the DVI to HDMI adapter cable is used, connect the audio cable to the audio input terminal (HDMI1: use
•AV2 IN AUDIO terminals).								HDMIFunctions PCScreenonTV
DVI Position Settings
If the picture position is not fit to the screen during the DVI connection, adjust the position on “DVI Position
Settings” in Setup Menu. The settings are memorized for each HDMI terminals and input signals.
•To make settings “How to Use Menu Functions”					to (p. 18)
Menu		Item				Adjustments
			H-pos	Adjusts horizontal position
Setup
	DVI Position			Adjusts vertical position				Advanced
	Settings		V-pos
			Reset
			DVI Position	Press the OK button to reset to the default Setup settings
			Settings
				( 1): The HDMI logo is displayed on HDMI-compliant equipment.
				(	2): Enquire at your local digital equipment retailer shop.

30 31