Panasonic TH-P65V10R Multi Window, Hdmi connection, PC connection, Sub 15-pin connector signal

Multi Window

You can watch two images at once. (p. 17)

●The same input mode cannot be displayed at once.

●The sound is active for main screen only in multi window. ●You cannot change the aspect ratio in multi window. ●This function is not available for PC or SD card.

●Component or HDMI input is available only as the main screen. ●Some signals are reformatted for suitable viewing on your display.

●The display timeout for the input mode or programme position can be adjusted by “Banner Display Timeout” in Setup Menu (p. 25).

HDMI connection

HDMI (high-definition multimedia interface) allows you to enjoy high-definition digital images and high-quality sound by connecting the TV and the equipment.

HDMI-compatible equipment (∗1) with an HDMI or DVI output terminal, such as a set top box, a DVD player or a game equipment can be connected to the HDMI terminal using an HDMI compliant (fully wired) cable.

About connections, see “External Equipment” (p. 42).

●HDMI is the world’s first complete digital consumer AV interface complying with a non-compression standard. ●If the external equipment has only a DVI output, connect to the HDMI1 terminal via a DVI to HDMI adapter cable

(∗2).

●When the DVI to HDMI adapter cable is used, connect the audio cable to the audio input terminal (HDMI1: use AV2 IN AUDIO terminal).

●Audio settings can be made on the “HDMI1 / 4 Input” menu screen. (p. 24)

●Applicable audio signal sampling frequencies (2ch L.PCM): 48 kHz, 44.1 kHz, 32 kHz ●HDMI2/3 terminals are for digital audio signal only.

●Use with a PC is not guaranteed. Only HDMI video formats indicated in the HDMI table (p. 48) are applicable. ●If the connected equipment has an aspect adjustment function, set the aspect ratio to “16:9”.

●These HDMI connectors are “type A”.

●These HDMI connectors are compatible with HDCP (High-Bandwidth Digital Content Protection) copyright protection.

●An equipment having no digital output terminal may be connected to the input terminal of either “COMPONENT”, “S-VIDEO”, or “VIDEO” to receive analogue signals.

●The HDMI input terminal can be used with only the following image signals:

480i, 480p, 576i, 576p, 720p, 1080i and 1080p. Match the output setting of the digital equipment. ●For details of the applicable HDMI signals, see p. 48.

(∗1): The HDMI logo is displayed on HDMI-compliant equipment.

(∗2): Enquire at your local digital equipment retailer shop.

PC connection

A PC may be connected to this TV so that the PC screen is displayed and sound is heard from the TV.

●PC signals that can be inputted: Horizontal scanning frequency 31 to 69 kHz; vertical scanning frequency 59 to 86 Hz (more than 1,024 signal lines could result in incorrect display of the image).

●A PC adapter is not necessary for the DOS/V-compliant D-sub 15-pin connector.

Note

●Some PC models cannot be connected to this TV.

●When using PC, set the colour display quality of PC to the highest position. ●For details of the applicable PC signals, see below.

●Max. display resolution

	Aspect	4:3	1,440 × 1,080 pixels
		16:9	1,920 × 1,080 pixels
●	D-sub 15-pin connector signal

Pin No.	Signal Name	Pin No.	Signal Name	Pin No.	Signal Name
	R		GND (Ground)		NC (not connected)
	G		GND (Ground)		NC (not connected)
	B		GND (Ground)		HD
	NC (not connected)		NC (not connected)		VD
	GND (Ground)		GND (Ground)		NC (not connected)

Technical Technical Information

47