Panasonic TQBC0627-2 manual Adjusting Position and Size, Adjusting screen

Picture Adjustments (PC mode)

Adjusting Position and Size

Adjusting screen

SET UP

1 Press to display the Setup menu.

2	Press to select H-Pos/H-Size/V-
	Pos/V-Size/Clock Phase.
	Setup
	Normalise	Normal
	H-Size
	V-Size
	H-Pos
3	V-Pos
	Clock Phase
	Sync	H & V

Press to adjust Pos./Size.

TV/AV

Press to exit from adjust mode.

1 Press TV/AV button.

2 Press Yellow (AV3) button to access ‘PC’ mode.

1 2 3

4 5 6

7 8 9

C 0

When the Position Left “” button is pressed When the Position Right “” button is pressed.

H-Size

When the Position Left “” button is pressed. When the Position Right “” button is pressed.

V-Size

	When the Position Left “” button is pressed.	When the Position Right “” button is pressed
H-Pos
	When the Position Left “” button is pressed.	When the Position Right “” button is pressed.
V-Pos
Clock Phase	Flickering and distortion can be eliminated by using the Position Left “” or Right “” button
	to carry out adjustment.

H & V : To synchronize by the horizontal and vertical signals from your PC.

Sync

on G : To synchronize by the green signal form your PC (if available).

Helpful Hint ( N / Normalise Normalisation)

While the Setup display is active, if either the N button on the remote control is pressed at any time or the or button is pressed while the yellow cursor is at the “Normalise” position, then all adjustment values are returned to the factory settings.

34