Panasonic TX-15LT2 This TV set is designed to operate on DC, TV Games / Home Computers

Page 3
Example 2
Example 1

Warnings and Precautions

This TV set is designed to operate on DC 15V.

To prevent damage which might result in electric shock or fire, do not expose this TV set to rain or excessive moisture. This TV must not be exposed to dripping or splashing water and objects filled with liquid, such as vases, must not be placed on top of or above the TV.

WARNING : HIGH VOLTAGE!!!

Do not remove the rear cover as live parts are accessible when it is removed. There are no user serviceable parts inside.

TV Games / Home Computers

Extended use of TV games or home computers with any television set can cause a permanent ‘shadow’ on the screen. This type of irreversible LCD panel damage, can be limited by observing the following points:

Reduce the brightness and contrast levels to a minimum viewing level.

Do not allow a still picture to be displayed for an extended period, as this can cause a permanent after-image to remain on the LCD TV screen.

Examples of still pictures include logos, video games, computer images, teletext and images displayed in 4:3 mode.

This type of LCD panel damage, is not an operating defect, and as such is not covered by the Panasonic warranty.

•The On/Off switch on this model does not fully disconnect the TV from the mains supply. Remove the mains plug from the wall socket when the TV set is not used for a prolonged period of time.

Note:

If the set is not switched off when the TV station stops transmitting, it will automatically go to stand-by mode after 30 minutes. This function will not operate when the TV is in AV mode.

Cabinet and LCD panel care

Remove the mains plug from the wall socket. The cabinet and LCD panel can be cleaned with a soft cloth moistened with mild detergent and water. Do not use solutions containing benzol or petroleum.

When ambient temperature is cool, the picture may take a short time to reach normal brightness, but this is not a malfunction. (After brief moment, the picture will have normal brightness.)

Adequate ventilation is essential to prevent failure of electrical components, we recommend that a gap of at least 10cm is left all around this television receiver even when it is placed inside a cabinet or between shelves.

Avoid exposing the TV set to direct sunlight and other sources of heat.

FOR YOUR SAFETY PLEASE READ THE FOLLOWING TEXT CAREFULLY

This appliance is supplied with a fitted three pin mains plug for your safety and convenience. A 5 amp fuse is fitted in this plug. If the fuse is replaced then the replacement fuse must be 5 amp rated and should be approved by ASTA or BSI to BS1362.

Check for the ASTA mark or the BSI mark on the body of the fuse.

If the fitted plug has a removable fuse cover you must ensure that it is refitted when the fuse is replaced. If you lose the fuse cover the plug must not be used until a replacement cover is obtained. Replacement fuse covers can be purchased through your local Panasonic dealer.

If the fitted moulded plug is replaced, the fuse should be taken out and the cut-off plug disposed of safely. There is danger of severe electrical shock if the cut off plug is inserted into any 13 amp socket.

If a new plug is to be fitted please observe the wiring code as shown below.

If in any doubt please consult a qualified electrician.

How to replace the fuse (for plug type shown in example 1):

Lift out the removable fuse compartment with a screwdriver and replace the fuse, then refit securely into the mains plug (see example 1).

How to replace the fuse (for plug type shown in example 2):

Lift open the fuse compartment, in the mains plug, with a screwdriver, and replace the fuse, then press the fuse cover down securely (see example 2).

IMPORTANT: -The wires in the mains lead of this appliance are coloured in accordance with the following code :-

BLUE : NEUTRALBROWN : LIVE

As the colours of the wires in the mains lead of this appliance may not correspond to the markings identifying the terminals in your plug, proceed as follows :-

1.The BLUE wire must be connected to the terminal marked ‘N’ or coloured black.

2.The BROWN wire must be connected to the terminal marked ‘L’ or coloured red.

IMPORTANT NOTE: Under no circumstances should either of these wires be connected to the Earth terminal of the three pin plug, marked with the letter ‘E’ or the earth symbol.

3

Image 3
Contents Operating Instructions Table of Contents Cabinet and LCD panel care How to replace the fuse for plug type shown in exampleThis TV set is designed to operate on DC TV Games / Home ComputersSupplied Accessories Fitting remote control batteriesBefore Operating This Set Optional External Equipment How to use the LCD standBefore Operating This Set Receiver LocationChoose Your Connection Type Connection of TV and VCR using Scart and RFConnecting the TV directly to an aerial only Quick start GuidePower-Indicator Auto set upQuick start Guide Owner ID Two basic functionsEnter NAME, House Number and Postcode Side panel controls and Remote control When in Stand-by mode, switche TV OnBasic controls Direct Programme Number Selection CH TV/AV Mode SelectionRemote control Basic controlsRecall button Used to store tuning and other function settingsStores some settings in Tuning menus Functions Following adjustments can be accessed directlyOn Screen Help ‘Instruction’ box Using the On Screen DisplaysTV/AV button is used to exit the menu system Return to the normal viewing screenBacklight, Contrast, Brightness, Colour, Sharpness, Tint Picture menuYou can change the level Picture menuHelpful Hint Normalization ModeSound menu Volume, Bass, Treble, Balance, Headphone VolumeSound menu SpeechAmbience List Setup menuTuning menu-overview Manual tun- Allows individual programme positions to beIng Tuned manually. see Tuning menu Programme edit Adding / deleting a programme channelMoving a programme channel Locking a programme channel Tuning menuRenaming a programme channel Press to store the new nameTuning menu Auto setup Tuning menu Manual tuning Manual tuning via side panelIt is possible to retune an individual programme position Default setting Press Tuning menu Shipping condition∗ ∗ ∗ Tuning menu Owner IDAspect Controls Panasonic AutoPanasonic Auto Letterbox Aspect ControlsZoom 169When the VCR playback is found, press STR to store Pressing Tuning your VCR and satellite receiverTuning your TV to the VCR Select programme position ‘0’ VCR by using orVCR / DVD Operation Advanced Remote Control OperationAdvanced Remote Control Operation List Store Update DisplayUpdate Index When in Fastext operationSub Coded Page Access How to connect the input terminals ConnectionsConnects VCRs and other peripheral equipment Amplifier to speaker system Connections How to connect the Audio OUT TerminalsConnecting Headphones / Earphones Connect headphones / earphones as followsSymptoms Checks Picture Sound TroubleshootingMaintenance To clean this unit, wipe with a soft, dry clothSpecifications Model Number TX-15LT2 Serial Number Customer’ Record