
“Video”
Still Mode (paused video)  | ≥Auto  | 
  | 
Select the type of picture shown when you pause playback  | ≥Field:  | Select if jittering occurs when “Auto” is selected.  | 
(> 48, Frames and fields).  | 
  | (The picture is coarser.)  | 
  | ≥Frame:  | Select if small text or fine patterns cannot be seen  | 
  | 
  | clearly when “Auto” is selected.  | 
  | 
  | (The picture is clearer and finer.)  | 
Seamless Play  | ≥On:  | The chapters in playlists are played seamlessly. This  | 
Select the play mode between playlist chapter segments and  | 
  | does not work while searching or when there are  | 
partially deleted titles.  | 
  | several audio types included on the playlist.  | 
  | 
  | Additionally, the positioning of chapter segments may  | 
  | 
  | change slightly.  | 
  | ≥Off:  | The points where chapters in playlists change are  | 
  | 
  | played accurately, but the picture may freeze for a  | 
  | 
  | moment.  | 
“Audio”
Dynamic Range Compression   | ≥On  | ≥Off  | ||
(Dolby Digital, Dolby Digital Plus and Dolby TrueHD only)  | 
  | 
  | ||
Change the dynamic range (> 48) for late night viewing.  | 
  | 
  | ||
Digital Audio Output  | 
  | 
  | 
  | |
≥Press [OK] to show the following settings.  | 
  | 
  | ||
≥For details on digital output (> 37)  | 
  | 
  | ||
  | Dolby D/Dolby D +/  | Select whether Dolby Digital,  | ≥Bitstream:  | 
  | 
  | Dolby TrueHD | Dolby Digital Plus, Dolby TrueHD,  | Select “Bitstream” when the connected equipment can  | |
  | 
  | DTS Digital Surround,  | decode the respective audio format.  | |
  | 
 | |||
  | 
  | j Connect equipment supporting HDMI (High Bit rate Audio)  | ||
  | 
  | and use a High Speed HDMI Cable in order to output high  | ||
  | 
  | “Bitstream” or “PCM” format.  | bit rate audio such as Dolby Digital Plus, Dolby TrueHD,  | |
  | 
  | ≥Not making the proper settings  | ||
  | 
  | may result in noise.  | ≥PCM: | 
  | 
  | 
  | ≥If the unit is connected with the  | Select “PCM” when the connected equipment cannot decode  | |
  | 
  | HDMI AV OUT terminal, the  | the respective audio format.  | |
  | 
  | specifications of the connected  | 
  | 
  | 
  | 
  | equipment take precedence over  | Refer to the operating instructions for connected devices to  | |
  | 
  | this unit and audio selected in  | verify whether or not they can decode each of the audio  | |
  | 
  | these items may not be output  | formats.  | 
  | 
  | 
  | (e.g., when a television is  | 
  | 
  | 
  | 
  | connected, the HDMI audio output  | 
  | 
  | 
  | 
  | of this unit is limited to down-  | 
  | 
  | 
  | 
  | mixed 2ch.)  | 
  | 
  | 
 | ≥On:  | The primary audio and secondary audio are mixed  | 
Turn on/off the button click sound on the menu and audio with  | 
  | and output. The sampling frequency is converted to  | 
secondary video in   | 
  | 48 kHz.  | 
  | ≥Off:  | The button click sound on the menu and secondary  | 
  | 
  | audio are not output.  | 
Downmix
Switch the downmix system for playing back 
≥When “Dolby D/Dolby D +/Dolby TrueHD” or 
≥The audio will be outputted in “Stereo” in the following cases:
jAVCHD playback
jPlayback of button click sound on the menu and audio with secondary video in 
≥Stereo:When connected to equipment that does not support the virtual surround function.
≥Surround encoded:When connected to equipment that supports the virtual surround function (to convert 
Settings
RQT9334
(ENG)
33