Viewing 3D images on TV, Using Precautions

Viewing 3D images on TV

Using Precautions

Cautions During Viewing

Wear the 3D Eyewear correctly. 3D images will not be correctly visible if the 3D Eyewear is worn upside down or back- to-front.

Other kinds of displays (such as computer screens, digital clocks, or calculators etc.) may be difficult to see while wearing the 3D Eyewear.

Do not wear the 3D Eyewear when watching anything other than 3D images.

For comfortable viewing

View from at least the recommended distance (3 times the effective height of the screen), Recommended Distance:

For a 42-inch television, 5.25' (1.6 m) or more. For a 47-inch television, 5.91' (1.8 m) or more.

When the top and bottom area of the screen are blackened, such as when playing movies, view the screen at a distance 3 times further than the height of the actual image. (That makes the viewing distance closer than above recommended distance.)

Stop using the 3D Eyewear immediately if your skin feels unusual.

In rare cases, the paint or materials used in the 3D Eyewear may cause an allergic reaction.

Stop using the 3D Eyewear immediately if you experience any redness, pain, or itching on the nose or temples. Prolonged use may cause such symptoms due to excess pressure, which may result in the user feeling unwell.

Care and Cleaning

Clean using a soft, dry cloth.

Wiping the 3D Eyewear with a soft cloth that is covered in dust or dirt may scratch the eyewear. Shake off any dust from the cloth before use.

Do not use benzene, thinner, or wax on the 3D Eyewear, as doing so may cause the paint to peel off.

Do not dunk the 3D Eyewear in liquid such as water when cleaning. Avoid storing the 3D Eyewear in hot or highly humid locations.

Viewing 3D images

Using the television menu controls, set so that 3D images are shown.

●You can watch 3D images in the following cases:

•When a 3D image supporting Blu-ray Disc is played on a 3D image supporting player/recorder connected using a HDMI cable to a 3D image supporting television.

•3D image supported broadcast (program)

•3D Photo, 3D Movie taken by LUMIX/Camcorder.

Put on the 3D Eyewear

View

When the HDMI receives information in which 3D mode is detected, 3D images are automatically displayed according to the signal. If the 3D images are not displayed correctly or the images cause discomfort, the images can be adjusted by “3D format select” or “3D settings”.

Change the view 3D⇔2D

■Simply switches 3D ⇔ 2D images (Auto mode)

3D format select	select
3D
2D	OK
	OK
	(example)

● Switches to Manual mode