Attaching the pedestal to TV
■Assembling the pedestal
Insert the protrusion of the Neck | Turn the stand over and fix stand neck | Accessories | ||
into the Base firmly. | securely with assembly screws. |
| ||
|
| (3 screws) |
| Assembly screws |
| Neck | • Do not hold the neck when turning over the stand. |
| |
| B x 3 pcs. |
| XYN4+F10FNK (Black) | |
| Protrusion of the |
| ||
| Neck (bottom) |
|
| size (M4 x 10) (5) |
|
|
| Hole for | XYN5+F16FN (silver) |
|
|
| size (M5 x 16) (7) | |
|
| Front | screw | |
|
| Bracket (1) | ||
| Front |
|
| |
| Back of Stand |
| TBL5ZA3238 | |
|
|
| ||
|
|
|
| |
Attach the Bracket to the protrusion of Neck. | Attach the cover and fix securely with |
| ||
Make sure that the bracket is anchored | assembly screw. |
| Neck (1) | |
before fixing the screws. | A x 1 pcs. |
| ||
Fix securely with assembly screws. (4 screws) |
| TXFBL5Z0069 | ||
|
|
|
| |
Protrusion of Neck (top) | B x 4 pcs. | Cover |
|
|
Bracket 
Cover (1)
TXFBL5Z0071
■Set-up
Tighten assembly screws 
(total 4 screws) loosely at first, then tighten them firmly to fix securely.
Rear view
Rear side
Cover is in the same bag with Owner’s Manual
Base (1)
TBL5ZX0292 (for 42”) 
TBL5ZX0294 (for 50”)
Arrow mark
Base 
(Image)
Warning
Hole for pedestal installation
A x 4 pcs. |
Bracket
Work on a flat surface
Removing the pedestal from the TV
Be sure to remove the pedestal in the following way when using the wall hanging bracket or repacking the TV.
Remove the assembly screws 
from the TV.
Lift the TV from the pedestal.
Remove the assembly screw 
from the cover.
Pull out the cover.
Remove the assembly screws 
from the Bracket. 
Remove the assembly screws 
from the Back of stand and pull out the neck.
Do not disassemble or modify the pedestal.
Otherwise, the TV may fall over and become damaged, and personal injury may result.
Caution
Do not use any pedestal other than that provided with this TV.
Otherwise, the TV may fall over and become damaged, and personal injury may result.
Do not use the pedestal if it becomes warped or physically damaged.
If you use the pedestal when it is physically damaged, personal injury may result. Contact your nearest Panasonic Dealer immediately.
During
If sufficient care is not taken to ensure screws are properly tightened during assembly, the pedestal will not be strong enough to support the TV, and it might fall over and become damaged, and personal injury may result.
When removing the pedestal, do not remove the pedestal by any methods other than the specified procedure. (Above)
Otherwise, the TV and/or pedestal may fall over and become damaged, and personal injury may result.
9