Panasonic TC-P50X3, TC-P46X3, TC-P42X3 AC Power Supply Cord, Handling the power supply cord

Page 5

Do not place any objects on top of the Plasma TV. If water spills onto the Plasma TV or foreign objects get inside it, a short-circuit may occur which could result in fire or electric shock. If any foreign objects get inside the Plasma TV, please consult an Authorized Service Center. In the unlikely event that you receive a shock from this product it is possible that your household outlet may be wired improperly. Have an electrician verify that the TV’s outlet is properly wired. If the symptom persists, have the TV serviced by a qualified authorized technician.

To prevent the spread of fire, keep candles or other open flames away from this product at all times

AC Power Supply Cord

To prevent fire or electric shock:

The Plasma TV is designed to operate on a 120 V AC,

60 Hz service. Insert the power cord plug as far as it will go into the wall socket.

If the plug is not fully inserted, heat may generate, which could cause a fire.

The included power cord is for use with this unit only.

Do not use any power cord other than that provided with this TV.

Do not handle the power cord plug with wet hands.

Do not do anything that might damage the power supply cord.

When disconnecting the power supply cord, hold the plug, not the cord.

Do not use the power supply cord if the plug or cord is damaged.

Replace the cord or contact your Authorized Service Center.

Do not use a 3-prong to 2-prong AC plug adapters to connect your TV’s plug to the wall outlet.

Doing so will defeat the TV plug’s safety feature, which can lead to a shock hazard. If the wall outlet does not accommodate a 3-prong plug, have a qualified electrician replace your outlet and check the associated wiring.

Handling the power supply cord

Insert the power plug fully into the socket outlet. (If the power plug is loose, it could generate heat and cause fire.)

Ensure that the power plug is easily accessible. Ensure the earth pin on the power plug is securely

connected to prevent electrical shock.

• An apparatus with CLASS I construction shall be connected to a power socket outlet with a protective earthing connection.

Do not touch the power plug with a wet hand. (This may cause electrical shock.)

Do not use any power cord other than that provided with this TV. (This may cause fire or electrical shock.)

Do not damage the power cord. (A damaged cord may cause fire or electrical shock.)

• Do not move the TV with the cord plugged in the socket outlet.

• Do not place a heavy object on the cord or place the cord near a high-temperature object.

• Do not twist the cord, bend it excessively, or stretch it.

• Do not pull on the cord. Hold onto the power plug body when disconnecting cord.

• Do not use a damaged power plug or socket outlet.

If a problem occurs (such as no picture or no sound), or if smoke or an abnormal odor is detected from the Plasma TV, unplug the power supply cord immediately. Continued use of the TV under these conditions might cause a fire or permanent damage to the TV. Have the TV evaluated by an Authorized Service Center. Servicing of the TV by unauthorized personnel is strongly discouraged due to its high voltage.

If water or an object gets inside the Plasma TV, if the Plasma TV is dropped, or if the enclosure becomes damaged, unplug the power supply cord immediately. A short-circuit may occur, which could cause a fire. Contact an Authorized Service Center for an evaluation.

CAUTION

Do not cover the ventilation holes.

Doing so may cause the Plasma TV to overheat, which can cause a fire or damage to the Plasma TV.

Leave a space of 3 15/16” (10 cm) or more at the top, left and right, and 2 3/4” (7 cm) or more at the rear.

When using the pedestal, keep the space between the bottom of the TV and the pedestal or stand surface clear from objects that may obstruct ventilation.

When Moving the Plasma TV

Be sure to disconnect all cables before moving the

Plasma TV.

Moving the TV with its cables attached might damage the cables which, in turn, can cause fire or electric shock.

To prevent an electric shock, disconnect the power plug from the wall outlet as a safety precaution before carrying out any cleaning.

Transport only in upright position.

Transporting the unit with its display panel facing upright or downward may cause damage to the internal circuitry.

Using a dry cloth, clean any dust from the power supply cord and plug regularly.

Build-up of dust on the power cord plug can increase humidity, which might damage the insulation and cause a fire.

This Plasma TV radiates infrared rays;

therefore, it may affect other infrared communication equipment. Install your infrared sensor in a place away from direct or reflected light from your Plasma TV.

The TV will still consume some power as long as the power supply cord is connected to the wall outlet.

Display panel is made of glass. Do not apply strong force or impact to the display panel.

This may cause damage resulting in injury.

The TV is heavy. TV should be handled by 2 or more people. Support as shown to avoid injury by the TV tipping or falling.

5

Image 5
Contents 41.6/46.0/49.9 inches measured diagonally English Español41,6/46,0/49,9 pulgadas medidas diagonalmente Viera SD memory card USB device Camcorder Set up Do not display a still picture for a long time Contents Important Safety Instructions Safety PrecautionsHandling the power supply cord AC Power Supply CordWhen Moving the Plasma TV To prevent fire or electric shockCEA Child Safety Notices Wall-hanging bracket Optional AccessoryAttaching the pedestal to TV AccessoriesBottom view Do not disassemble or modify the pedestalInstalling the remote’s batteries Getting started Accessories/Optional AccessoryPower cord connection To attach To removeAntenna or Cable connection ConnectionsConnection Panels AV cable connection Started ConnectionsAudio connection For HDMI-ARC Audio Return Channel connection, see pRemote control TV controls/indicatorsIdentifying Controls Front of the TVTurn the TV On with the Power button First Time SetupConfigure your viewing mode Identifying ControlsSelect signal type Cable/Antenna ANT/Cable setupLabel the inputs for easy identification Label inputs Select scan typeStarted First Time Adjust the Clock Set clockSetup About wireless LAN Complete First time setupWireless network First time setup Display Wireless network Select the connection methodSelect a channel number Turn power onWatching TV Call up a favorite channel Change aspect ratio and Zoom the pictureDisplay the SUB Menu Entering characters Password setting/enteringOperate USB keyboard Watching TVDisplay Viera Tools Select the item Using Viera ToolsSet each item Press to go back to the previous screenFor details, see the manual for the connected equipment Display the Input select menu Select the input modeFrom external devices Tools Media information Using Media playerBasic features for Media player Display Media player Insert a Media SD card or USB flash memorySelect Drive Select the data Photos/Videos/MusicSlideshow settings p Thumbnails size Display Setup SUB Menu and select itemSort Photo optionsSlideshow settings Using MediaSlideshow PlayerVideo options Select Video options in Setup SUB MenuVideos view Repeat playbackOther settings in Media player UsingMusic options Media playerVersion Viera LinkTM Hdavi ControlTMHdmi cable Equipment onlyViera Link Connections with Viera Link function Viera LinkTM Hdavi ControlTMSelect and make other settings Display the menu Select Viera Link settings in SetupViera Link settings and Available features Select Viera LinkPower on link Automatic Input SwitchingPower off link Energy saving modeSet Viera Link menu and Available featuresDisplay the Viera Link menu Back to TV Viera Link control only with the TV’s remote controlSpeaker control Using Easy Iptv p Using Dlna feature Home network p Using Network servicesUsing Network camera p Available Network service and featuresSelect wired or wireless connection Contact your Broadband service providerConnecting to the Internet Using Network servicesSelect the settings and set Display the menu Select Network settingsWireless network Confirm Current settings and status Connection testProxy setting Wireless network Wireless network settingIP address/DNS settings Network cameras list Software updateUsing Easy Iptv Other settingsUsing USB keyboard Display Menu Adjust the Picture and AudioDisplay Viera Tools Select the Dlna Select contentsSelect server View/PlayDefault camera setting p Viera Link control only with the TV’s remote control pView Network CameraDisplay the menu Select Setup Editing and Setting ChannelsSelect ANT/Cable setup ANT/Cable setup and operationManual program Set manually Setting ChannelsSignal meter Check signal strength Select the item and adjust How to Use Menu FunctionsDisplay the menu Select the menuHow to Use Menu Functions Audio settings Adjust Audio quality Channel Mode Settings Items Item Description Mode OffProgram Mode PasswordAnti Image Pixel orbiter Enable/Disable Settings Items Channel surfECO/energy No signal for Stay on/ PowerAdvanced Support Information Ratings List for parental control How to Use Menu FunctionsTechnical Information To reset the aspect ratio OKAspect Ratio Format SizeData format information TechnicalSD Card/USB flash memory warning messages Recommended USB device connectionsHdmi connection Viera LinkTM Hdavi ControlTMDigital Audio OUT terminal Closed Caption CCCare and Cleaning Questions Answers Change settings of Closed Caption CC. pQuestions Frequently Asked Questions FAQ Support InformationOther How do I check for the latest How do I get Easy Iptv to work on my TV?My TV? Software firmware version forTC-P42X3 TC-P46X3 TC-P50X3 SpecificationsIndex Limited Warranty Limits And Exclusions Limited Warranty CoverageOn-Site or Carry-in Service For hearing or speech impaired TTY users, TTY Customer Services Directory United States and Puerto RicoAccessory Purchases United States and Puerto Rico Panasonic Product Limited Warranty Limited Warranty for CanadaPage Ambler Drive Customer’s RecordAnotación del cliente Rear Panel Side view with the pedestal option attached Top View Side Panel Front View Side ViewBack View Side Panel Rear Panel Back View Top View Front View Side ViewSide view with Pedestal optionSide Panel Rear Panel Back View Side view with Pedestal option