Network cameras list
Before using a Network camera, you need to register the camera as shown below. You can also set Default camera or Disconnect/Delete the registered cameras.
Press “Network cameras list” and display screen
Set Network camera setting
Network cameras list | select |
Start camera search.
●Before you start to search for a camera, switch the camera to registration mode.
●Search condition also depends on “Network settings”
Camera 1 | Connected | Default | Delete camera information. | |
Camera name | Model | Status |
| |
... | ... | ... |
|
|
... | ... | ... |
| Disconnect to camera. |
... | ... | ... |
| |
... | ... | ... |
| “Disconnected” will be displayed in “Status”. |
... | ... | ... |
| |
... | ... | ... |
| Set to default use. |
... | ... | ... |
| |
|
| |||
Select | OK |
|
| Displayed “(Default)” next to camera name. |
| RETURN |
|
|
Find cameras | Delete | (Available only when reconnecting) |
Disconnect | Default camera | |
●For this operation, please refer to the operating | Connect to Camera. “Connect” will be displayed in | |
manual for the Network camera. | “Status”. |
Software update
Select “Software update”
Menu | Network settings | |
| Connection test | |
| Network connection | Wireless (WiFi) |
| Wireless network | |
| IP address/DNS settings | |
| Network cameras list | |
| Software update | |
| Mac address |
|
Press OK to start the Software update screen select Follow directions on the screen
●Set “Clock” first. (p. 15)
OK
38