Panasonic TC-P55GT31 owner manual How to Use Menu Functions

Settings

Items

Item Description

Aspect

Screen format

FULL/H-FILL/

Changes the format (aspect ratio).

adjustments

JUST/4:3/ZOOM

Lets you choose the aspect depending on the format of

received signal. (p. 58)

HD size

Size 1/Size 2

Selects between 95 % (Size 1) or 100 % (Size 2) for the

scanning area with High-definition signal.

Select “Size 1” if noise is generated on the edges of the screen.

● Size 1: Selected item for “HD size”. Scanning 95 %

● Size 2: Selected item for “HD size”. Scanning 100 %

H size

Size 1/Size 2

Adjusts the horizontal display range to reduce noise of both side

edges of an image.

Size 2: Adjusts the image size according to the aspect mode to

reduce noise. (p. 58)

Zoom

Adjusts vertical alignment and size when aspect setting is “ZOOM”.

adjustments

PC adjustments

Reset to defaults

Resets PC adjustments.

Sync

H & V

The H and V sync signals are input from the HD/VD connector. (p. 61)

On green

Uses a synchronized signal on the Video G signal, which is

input from the G connector. (p. 61)

Dot clock

Alleviates the problem if a picture appears to be vertically-striped, flickers partially or is blurred.

H-position

Adjusts the horizontal position.

V-position

Adjusts the vertical position.

Clock phase

Alleviates the problem if the whole picture appears to flicker or is blurred.

First adjust the Dot Clock to get the best possible picture, then adjust the clock Phase

so that a clear picture appears.

● It may not be possible to display a clear picture due to poor input signals.

Input

Switches to wide display.

resolution

● VGA (640×480 pixels), WVGA (852×480 pixels), XGA (1,024×768 pixels),

WXGA (1,280×768 pixels)

● Options change depending on signals

H-frequency

Displays the H (Horizontal)/V (Vertical) frequencies.

V-frequency

Display range

Horizontal:15 - 110 kHz

Vertical: 48 - 120 Hz

HDMI settings

HDMI/DVI RGB

Auto/

Prevents the blown out highlights and blocked up shadows when

range (HDMI 1-4)

Standard

a wide-range signal is received. Selects between standard RGB

(16-235)/

range (16-235 bits) or non-compliance (0-255 bits).

Auto: Switches the RGB range (Standard (16-235)/

Nonstandard

Nonstandard) depending on the HDMI signal information.

Contents type

Off/Auto/Photo/

Sets content type to each HDMI input.

(HDMI 1-4)

Graphics

Auto: Switches content type automatically depending on the