FAQs
Problem | Actions |
Problem
Actions
Chaotic image, noisy
No image can be displayed
Screen | Blurry or |
| |
| distorted image |
(no sound or low volume)
Neither image nor sound is produced
No sound is produced 
Sound | Sound level is low |
or sound is distorted |
Whirling sound is heard
•Set "D. PNR" in the Picture menu (to remove noise).
•(p. 18)
Check nearby electrical products (car, motorcycle, fluorescent lamp).
•Is "Colour" or "Contrast" in the Picture menu set to the minimum? (p. 18)
•Check "Colour system" (p. 20)
•Reset channels. (p. 10 and p. 20)
•Is the TV in "AV mode"?
•Is the mains lead plugged into the socket outlet?
•Is the TV turned On?
•Check Picture menu (p. 18) and volume.
•Is "Sound Mute" active? (p. 7)
•Is the volume set to the minimum?
•Sound signal reception may be deteriorated.
•Check "Sound system" (p. 20)
•The sound is from
Sound is unusual
HDMI | An error message |
| |
| appears |
"Control with HDMI" function does
not work
TV goes into "Standby mode"
Other
An error message appears
•Set the sound setting of the connected equipment to "2ch L.PCM".
•Check the "HDMI1 / 3 input" setting in the Sound menu.
•If digital sound connection has a problem, select analogue sound connection. (p. 32)(p. 18)
•Contact the authorized Service Centre.
Switch the TV on again with the equipment on. |
| |
•Set “Control with HDMI” to “Off”, then set to “On” again. |
| |
•(p. 26) | •Frequently Asked | |
The sleep function is activated. | ||
Questions | ||
•The TV enters "Standby mode" about 30 min. | ||
•after broadcasting ends. |
| |
|
| |
Follow the message's instructions. | FAQs, | |
•If the problem persists, contact the authorized | ||
•Service Centre. | etc. | |
| ||
|
|
36 | 37 |