Panasonic TH-42PY800AZ, TH-50PY800AZ manual Select the external input, Select PC, Setup

Displaying PC Screen on TV

The screen of the PC connected to the TV can be displayed on the TV.

You can also listen to PC sound with the audio cable connected.

•To connect PC			p. 38
		INPUT	1	Select the external input
ASPECT		EXIT
	OK		2
MENU		RETURN		Select “PC”
					access
				Input Selection
	OPTION DIRECT TV REC			AV1
				AV2
				AV3	select
1	2	3		AV4
				PC
				HDMI1
4	5	6		HDMI2
				HDMI3	Corresponding signals p. 42
7	8	9		TV
					•If “H-freq.” or “V-freq.” is shown in red,
					•the signals may not be supported.

0

VCR

■To return to TV

■PC menu setting (changed as desired)

•To make settings “How to Use Menu Functions” to (p. 20)

Menu		Item		Adjustments / Configurations (options)
			W/B High R	White balance of bright red area
Picture			W/B High B	White balance of bright blue area			and
	Settings		Gamma	(S Curve / 2.0 / 2.2 / 2.5)		repeatedly adjusted
	Advanced		W/B Low R	White balance of dark red area
	PC		W/B Low B	White balance of dark blue area
			Reset to	Press the OK button to reset to the default Picture settings
			Default
			Input	Switches to a wide view
				VGA (640 × 480 pixels), WVGA (852 × 480 pixels),
			Resolution	•XGA (1,024 × 768 pixels), WXGA (1,366	× 768 pixels)
				•Options change depending on signals
			Clock	Set to the minimum level if noise occurs
			H-pos	Adjusts horizontal position
Setup	PC
			V-pos	Adjusts vertical position
	Setup
				Eliminates flicker and distortion
			Clock Phase	•Adjust after Clock adjustment	•Set to the minimum level if noise occurs
			Sync	PC sync signal type (H & V / On G)
				H & V : Horizontal and Vertical sync from your PC (Most common sync format)
				•On G : Sync on Green sync from your PC
			Reset to	Press the OK button to reset to the default Setup settings
			Default
•Other	items	p. 22 and p. 23

•Displaying PC•Screen on TV Input Labels

Advanced

31