Panasonic TH-50PZ850AZ, TH-42PZ850AZ Select the external input, Select PC, Setup, Settings

Displaying PC Screen on TV

The screen of the PC connected to the TV can be displayed on the TV.

You can also listen to PC sound with the audio cable connected.

•To connect PC	p. 44
INPUT	1	Select the external input
OPTION SD CARD
EXIT
	2	Select “PC”	access
		Input Selection
RETURN		AV1
		AV2
		AV3	select
		AV4
		PC
		HDMI1
		HDMI2
		HDMI3	Corresponding signals p. 48
		HDMI4
		TV	•If “H-freq.” or “V-freq.” is shown in red,
			•the signals may not be supported.
■To return to TV			PC Audio input is via AV2 Audio
			•connection. (p. 45)

■PC menu setting (changed as desired)

•To make settings “How to Use Menu Functions” to (p. 24)

	Menu		Item		Adjustments / Configurations (options)
				W/B High R	White balance of bright red area
	Picture			W/B High B	White balance of bright blue area			and
		Settings		Gamma	(S Curve / 2.0 / 2.2 / 2.5)		repeatedly adjusted
		Advanced		W/B Low R	White balance of dark red area
		PC		W/B Low B	White balance of dark blue area
				Reset PC	Press the OK button to reset to the default Picture settings
				Settings
				Input	Switches to a wide view
					VGA (640 × 480 pixels), WVGA (852 × 480 pixels),
				Resolution	•XGA (1,024 × 768 pixels), WXGA (1,366	× 768 pixels)
					•Options change depending on signals
				Clock	Set to the minimum level if noise occurs
				H-pos	Adjusts horizontal position
	Setup	PC
				V-pos	Adjusts vertical position
		Setup
					Eliminates flicker and distortion
				Clock Phase	•Adjust after Clock adjustment	•Set to the minimum level if noise occurs
				Sync	PC sync signal type (H & V / SOG)
					H & V : Horizontal and Vertical sync from your PC (Most common sync format)
					•SOG : Sync on Green sync from your PC
				Reset PC	Press the OK button to reset to the default Setup settings
				Settings
36
	•Other	items	p. 26 and p. 27