Technical Information
PC connection
A PC may be connected to this TV so that the PC screen is displayed and sound is heard from the TV.
FAQs
Before requesting service or assistance, please follow these simple guides to resolve the problem. If problem still persists, please contact your local Panasonic dealer for assistance.
PC signals that can be inputted: Horizontal scanning frequency 31 to 69 kHz; vertical scanning frequency | |||||||||||||||
•59 to 86 Hz (more than 1,024 signal lines could result in incorrect display of the image). |
| ||||||||||||||
•A PC adapter is not necessary for the |
|
|
| ||||||||||||
| Note |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Some PC models cannot be connected to this TV. |
|
|
|
|
|
| |||||||||
•When using PC, set the colour display quality of PC to the highest position. |
|
|
| ||||||||||||
•For details of the applicable PC signals, see below. |
|
|
|
|
|
| |||||||||
•Max. display resolution |
|
|
|
|
|
|
|
| |||||||
• |
|
|
|
|
|
|
|
|
|
|
|
| |||
|
| Model No. |
|
|
|
|
|
| |||||||
| Aspect |
|
|
|
|
|
|
|
|
|
|
| |||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
|
|
| 4:3 |
|
|
|
| 768 × 768 pixels |
|
|
| 1,024 × 768 pixels | |||
• |
|
| 16:9 |
|
|
|
| 1,024 × 768 pixels |
|
| 1,366 × 768 pixels | ||||
|
|
|
|
|
|
|
| ||||||||
| 5 | 4 | 3 | 2 | 1 |
|
| Pin No. | Signal Name | Pin No. | Signal Name |
| Pin No. | Signal Name | |
|
|
|
|
|
|
|
|
|
|
| |||||
| 10 9 | 8 | 7 | 6 |
|
|
|
|
|
|
|
|
|
| |
|
|
|
| R |
| GND (Ground) |
|
| NC (not connected) | ||||||
| 15 | 14 | 13 | 12 | 11 |
|
|
| G |
| GND (Ground) |
|
| NC (not connected) | |
|
|
|
|
|
|
|
|
| B |
| GND (Ground) |
|
| HD | |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| NC (not connected) |
| NC (not connected) |
|
| VD | |
|
|
|
|
|
|
|
|
| GND (Ground) |
| GND (Ground) |
|
| NC (not connected) | |
Input signal that can be displayed
COMPONENT (Y, PB/CB, PR/CR), HDMI ∗ Mark: Applicable input signal
Signal name | COMPONENT | HDMI |
480i (60 Hz) | ∗ | ∗ |
480p (60 Hz) | ∗ | ∗ |
576i (50 Hz) | ∗ | ∗ |
576p (50 Hz) | ∗ | ∗ |
720p (50 Hz) | ∗ | ∗ |
White spots or shadow images (noise)
•Check the position, direction, and connection of the aerial.
Neither image nor sound is produced
•Is the TV in “AV mode”?
•Isoutlet?the mains lead plugged into the socket
•Is the TV turned On?
•Check Picture Menu (p. 20) and volume.
An error message appears
•Follow the message’s instructions.
•If the problem persists, contact the authorized Service Centre.
Permanently lit spots on screen
•Due to production process involved in this technology this may result in some pixels which are permanently lit or unlit. This is not a malfunction.
Contrast is reduced
•Contrast is lowered when the following conditions without any user operation for a few minutes:
●no signal in DVB or AV mode
●selected invalid channel
●selected radio channel
●displayed menu
720p (60 Hz) | ∗ | ∗ |
1,080i (50 Hz) | ∗ | ∗ |
1,080i (60 Hz) | ∗ | ∗ |
1,080p (50 Hz) |
| ∗ |
1,080p (60 Hz) |
| ∗ |
PC (D-sub 15P)
|
| Signal name | Horizontal frequency (kHz) | Vertical frequency (Hz) |
640 × 400 @70 Hz | 31.47 | 70.07 | ||
640 × 480 @60 Hz | 31.47 | 59.94 | ||
640 × 480 @75 Hz | 37.50 | 75.00 | ||
800 × 600 @60 Hz | 37.88 | 60.32 | ||
800 × 600 @75 Hz | 46.88 | 75.00 | ||
800 × 600 @85 Hz | 53.67 | 85.06 | ||
852 × 480 @60 Hz | 31.44 | 59.89 | ||
1,024 | × 768 @60 Hz | 48.36 | 60.00 | |
1,024 | × 768 @70 Hz | 56.48 | 70.07 | |
1,024 | × 768 @75 Hz | 60.02 | 75.03 | |
1,024 | × 768 @85 Hz | 68.68 | 85.00 | |
1,280 | × 1,024 @60 Hz | 63.98 | 60.02 | |
1,366 | × 768 @60 Hz | 48.39 | 60.04 | |
Macintosh13” (640 × 480) | 35.00 | 66.67 | ||
Macintosh16” (832 × 624) | 49.73 | 74.55 | ||
Macintosh21” (1,152 × 870) | 68.68 | 75.06 | ||
Note | Signals other than above may not be displayed properly. |
| ||
•The above signals are reformatted for optimal viewing on your display. | ||||
|
| •Applicable input signal for PC is basically compatible to VESA standard timing. | ||
•
•PC signal is magnified or compressed for display, so that it may not be possible to show fine detail with sufficient clarity.
ProblemActions
|
|
|
|
| • | |
|
| Set |
| |||
| Chaotic image, noisy | •FrequentlyAskedQuestions TechnicalInformation | ||||
ScreenSound | •Sound signal reception may be deteriorated. | |||||
or sound is distorted | ||||||
|
| ••Check nearby electrical products (car, motorcycle, fluorescent lamp). |
|
| ||
| No image can be displayed | •(p.Is “Colour”20) | or “Contrast” in the Picture Menu set to the minimum? |
|
| |
| Blurry or distorted image | •Reset channels. (p. 24) |
|
| ||
| (no sound or low volume) |
|
| |||
| Unusual image is displayed | •again.Turn off the TV with Mains power On / Off switch, then turn it on |
|
| ||
| No sound is produced | Is “Sound mute” active? (p. 7) |
|
| ||
| ••Is the volume set to the minimum? |
|
| |||
|
|
|
| |||
| Sound level is low |
|
|
|
| |
HDMI |
|
|
| FAQs,etc. | ||
are unusual when the equipment | •Check an input signal from the equipment. (p. 36) |
| ||||
|
| Set the sound setting of the connected equipment to “2ch L.PCM”. |
|
| ||
| Sound is unusual | •Check the “HDMI1 Input” setting in the Sound Menu. (p. 20) |
|
| ||
| •If digital sound connection has a problem, select analogue sound |
|
| |||
|
| •connection. (p. 29) |
|
| ||
| Pictures from external equipment | Is the HDMI cable connected properly? (p. 32) |
|
| ||
| •Turn Off the TV and equipment, then turn them On again. |
|
| |||
| is connected via HDMI | ••Use an equipment compliant with |
|
| ||
36 | 37 |