Panasonic DV-686A-s manual Operating Environment, Risk of Electric Shock Do not Open

D3-4-2-1-7c_A_En

D3-4-2-2-1a_A_En

D3-4-2-1-4_A_En

D3-4-2-2-2a_A_En

D3-4-2-1-7b_A_En

01

IMPORTANT

CAUTION

RISK OF ELECTRIC SHOCK

DO NOT OPEN

The lightning flash with arrowhead symbol,	CAUTION:	The exclamation point within an equilateral
within an equilateral triangle, is intended to	TO PREVENT THE RISK OF ELECTRIC	triangle is intended to alert the user to the
alert the user to the presence of uninsulated	SHOCK, DO NOT REMOVE COVER (OR	presence of important operating and
"dangerous voltage" within the product's	BACK). NO USER-SERVICEABLE PARTS	maintenance (servicing) instructions in the
enclosure that may be of sufficient	INSIDE. REFER SERVICING TO QUALIFIED	literature accompanying the appliance.
magnitude to constitute a risk of electric	SERVICE PERSONNEL.
shock to persons.		D3-4-2-1-1_En-A

CAUTION
This product is a class 1 laser product, but this
product contains a laser diode higher than Class 1.		CLASS 1
To ensure continued safety, do not remove any covers
or attempt to gain access to the inside of the product.		LASER PRODUCT
Refer all servicing to qualified personnel.
The following caution label appears on your unit.
Location: inside of the unit
CAUTION	: VISIBLE AND INVISIBLE LASER RADIATION WHEN OPEN. AVOID EXPOSURE TO BEAM.	7260000356 SH
VORSICHT	: SICHTBARE UND UNSICHTBARE LASERSTRAHLUNG,WENNABDECKUNG GEÖFFNET NICHT DEM STRAHL AUSSETZEN!
ADVARSEL	: SYNLIG OG USYNLIG LASERSTRÅLING VED ÅBNING UNDGÅ UDSÆTTELSE FOR STRÀLING.
VARNING	: SYNLIG OCH OSYNLIG LASERSTRÅLNING NÄR DENNA DEL ÄR ÖPPNAD BETRAKTA EJ STRÅLEN.
VARO!	: AVATTAESSA ALTISTUT NÄKYVÄ JA NÄKYMÄTTÖMÄLLE LASERSATEIL YLLE. ÄLÄ KATSO SÄTEESEN.
CUIDADO	: RADIACIÓN LÁSER VISIBLE E INVISIBLE AL ESTAR ABIERTO. EVITAR EXPOSICIÓN AL RAYO.

[Singapore and Taiwanese model only]

726000A114 SH

D3-4-2-1-8_A_En

2

En

WARNING

Slots and openings in the cabinet are provided for ventilation to ensure reliable operation of the product, and to protect it from overheating. To prevent fire hazard, the openings should never be blocked or covered with items (such as newspapers, table-cloths, curtains) or by operating the equipment on thick carpet or a bed.

WARNING

Before plugging in for the first time, read the following section carefully.

The voltage of the available power supply differs according to country or region. Be sure that the power supply voltage of the area where this unit will be used meets the required voltage (e.g., 230V or 120V) written on the rear panel.

Operating Environment

Operating environment temperature and humidity:

+5 ºC – +35 ºC (+41 ºF – +95 ºF); less than 85 %RH (cooling vents not blocked)

Do not install this unit in a poorly ventilated area, or in locations exposed to high humidity or direct sunlight (or strong artificial light)

CAUTION

The POWER switch on this unit will not completely shut off all power from the AC outlet. Since the power cord serves as the main disconnect device for the unit, you will need to unplug it from the AC outlet to shut down all power. Therefore, make sure the unit has been installed so that the power cord can be easily unplugged from the AC outlet in case of an accident. To avoid fire hazard, the power cord should also be unplugged from the AC outlet when left unused for a long period of time (for example, when on vacation).

If the AC plug of this unit does not match the AC outlet you want to use, the plug must be removed and appropriate one fitted. Replacement and mounting of an AC plug on the power supply cord of this unit should be performed only by qualified service personnel. If connected to an AC outlet, the cut-off plug can cause severe electrical shock. Make sure it is properly disposed of after removal.

The equipment should be disconnected by removing the mains plug from the wall socket when left unused for a long period of time (for example, when on vacation).