Panasonic TH-42PR11UH, TH-37PR11UH, TH-42PR11UK Color System / Panasonic Auto, Pulldown, XGA Mode

SET UP for Input Signals

COLOR SYSTEM / Panasonic AUTO

Select SIGNAL from the “SET UP” menu during VIDEO (S VIDEO) input signal mode.(“SIGNAL [VIDEO]” menu is displayed.)

	Press to select the “COLOR SYSTEM” or “Panasonic AUTO”.
						SIGNAL	[ VIDEO ]
	Press to select each function.
						3D Y/C FILTER (NTSC)	ON
	If the image becomes unstable:					COLOR SYSTEM	AUTO
						3 : 2 PULLDOWN	OFF
	With the system set on Auto, under conditions of low level or					Panasonic AUTO (4 : 3)	4:3
	noisy input signals the image may in rare cases become unstable. Should this
	occur, set the system to match the format of the input signal.
Mode				Function
COLOR SYSTEM		Set the color system to match the input signal. When selecting “AUTO”, the color system is automatically
		selected from NTSC/PAL/SECAM, however, M.NTSC signal is not displayed properly depending on
		the attached terminal board. To display M.NTSC signal, select “M.NTSC” in COLOR SYSTEM.
		AUTO	PAL	SECAM	M.NTSC	NTSC
Panasonic AUTO		Set to “4:3” to view 4:3 images in an unchanged format when Panasonic AUTO is selected.
(4 : 3 )		If you would like to view 4:3 images in Just format, set to “JUST”.

Note:

Panasonic AUTO does not function when BNC Dual Video Terminal Board (TY-FB9BD) is used.

3:2 PULLDOWN

3:2 PULLDOWN: When ON, the display attempts to reproduce a more natural interpretation of sources such as movie pictures, which are recorded at 24 frames per second.

If the picture is not stable, turn the setting to OFF.

Notes:

When ON, this setting only affects the following signal input:

•NTSC / PAL signal input during “VIDEO (S VIDEO)” input signal.

•525i(480i), 625i(575i), 1125(1080)/60i signal input during “COMPONENT” input signal.

Press to select “3:2 PULLDOWN”.

Press to set ON/OFF.

3 : 2 PULLDOWN OFF

XGA MODE

This menu is displayed when the input signal is analog (Component/PC). This unit supports three types of XGA signals with 60Hz vertical frequency having different aspect ratios and sampling rates (1,024 × 768 @ 60Hz, 1,280 × 768 @ 60Hz, and 1,366 × 768 @ 60Hz). Be sure to make settings in accordance with the input signal in order to achieve a more appropriate and attractive display.

In addition, after making this setting, be sure to make each adjustment (such as “AUTO SETUP”) on the “POS. /SIZE” menu as necessary. (see page 21)

Press to select “XGA MODE”.

Press to select “1024×768”, “1280×768” ,	XGA MODE	1024 × 768
“1366×768”.

32