Panasonic TH-50PHD5 manual Advanced Settings, Picture Adjustments

PICTURE Adjustments

Item	Effect		Adjustments
PICTURE			Adjusts the proper picture contrast.
	Less	More
BRIGHTNESS			Adjusts for easier viewing of dark pictures
			such as night scenes and black hair.
	Darker	Brighter
COLOR			Adjusts color saturation.
	Less	More
TINT			Adjust for natural flesh tones.
(NTSC only)	Reddish	Greenish
SHARPNESS			Adjusts picture sharpness.
	Less	More

Notes:

(1)“COLOR” , “TINT” and “SHARPNESS” settings cannot be adjusted for “RGB” and “PC” input signal modes.

(2)You can change the level of each function (PICTURE, BRIGHTNESS, COLOR, TINT, SHARPNESS) for each PICTURE menu.

(3)The setting details for STANDARD, DYNAMIC and CINEMA respectively are memorized separately for each input mode (VIDEO (S VIDEO), COMPONENT, RGB and PC).

(4)The “TINT” setting can be adjusted for NTSC signal only during “VIDEO (S VIDEO)” input signal.

Note:

In PICTURE, there is not a noticeable change even when contrast is increased with a bright picture or reduced with a dark picture.

ADVANCED SETTINGS

Item Effect

BLACK

EXTENSION

Less More

W/B HIGH R

Less More

W/B HIGH B

Less More

W/B LOW R

Less More

W/B LOW B

Less More

GAMMA

Down Up

Details

Adjusts the dark shades of the image in gradiation.

Adjusts the white balance for light red areas.

Adjusts the white balance for light blue areas.

Adjusts the white balance for dark red areas.

Adjusts the white balance for dark blue areas.

2.0 2.2 2.5

Notes:

(1) Carry out “W/B” adjustment as follows.

AAdjust the white balance of the bright sections using the “W/B HIGH R” and “W/B HIGH B” settings.

BAdjust the white balance of the dark sections using the “W/B LOW R” and “W/B LOW B” settings.

CRepeat steps A and B to adjust.

Steps A and B affect each other’s settings, so repeat each step in turn to make the adjustment.

(2)The adjustment values are memorized separately for each input mode (VIDEO(S VIDEO), COMPONENT, RGB and PC).

(3)The adjustment range values should be used as an adjustment reference.

Helpful Hint ( N / NORMALIZE Normalization)

On the remote control unit, while the “ADVANCED SETTINGS” menu is displayed, if either the N button is pressed at

any time or the (ACTION button) is pressed during “NORMALIZE”, then all adjustment values are returned to the factory settings.

29