Basic Controls
Remote Control Transmitter
POWER button
The Plasma Display must first be plugged into the wall outlet.
Press this button to turn the Plasma Display on, from standby mode. Press it again to turn the Plasma Display Off to standby mode.
MENU button
Displays the menu screen. (see page 18)
OK button
Press to make selections.
POSITION buttons
POWER INPUT
MENUMUTE
INPUT button (see page 15)
Sound mute On / Off
Press this button to mute the sound. Press again to reactivate sound. Sound is also reactivated when power is turned off or volume level is changed.
RETURN button
Press the RETURN button to return to previous menu screen.
RETURN
RECALL button
Press to display the current input signal RECALL ASPECT OFF TIMER mode.
ASPECT button |
|
|
Press to adjust the aspect. | TNQ4CM051 CH | VOL |
This button can be used only in AV | ||
input signal. |
|
|
Channel buttons
Press the buttons to adjust the channel. These buttons are also used for to adjusting digital channel when a tuner pack is installed. For more information, please refer to the tuner pack's manual.
OFF TIMER button
The Plasma Display can be preset to switch to standby mode after a fixed period.
Each time the button is pressed, the timer is changed with an interval of 10 minutes.
10 
20 
30 
40 
50
OFF 
120 
60
When the timer is set, the TV will display a notification countdown 3 minutes before it switches to standby mode.
Volume Adjustment
Press the Volume Up “+” or Down
DISPLAY
17