Playback Function, Clock SET UP, Normal Playback

TO PRESET THE CHANNEL AGAIN

1 Press [MENU] until the main menu appears.

2 Select "CHANNEL SET UP" by pressing [PLAY] or [STOP]. Then, press [F.FWD].

3Select "TV" or "CATV" by pressing [PLAY] or [STOP]. Then, press [F.FWD] once or twice. After scanning, the tuner stops at the lowest memorized channel.

TO ADD/DELETE CHANNELS

When the VCR automatically program the tuner to scan
only the channels you receive in your area, some
channels may be skipped due to weak signal. You can
manually add the channel in the VCR memory.
1 Press [MENU] until the main menu
appears.	- MENU -
2 Select "CHANNEL SET UP" by	TIMER PROGRAMMING
	AUTO REPEAT	[OFF]
pressing [PLAY] or [STOP]. Then,	CHANNEL SET UP
	CLOCK SET
press [F.FWD].	LANGUAGE SELECT
	AUDIO OUT	[ON]
	TV STEREO
3 Select "MANUAL SET UP" by	SAP

pressing [PLAY] or [STOP]. Then,
press [F.FWD].
4 Enter the desired channel number by pressing
[PLAY] or [STOP].
5 Add or Delete it from memory by pressing [F.FWD]
or [REW] so that "ADD" or "DELETE" flashes on the
TV screen accordingly.
6 Exit the Preset mode by pressing [EXIT/RESET].

TO CHANGE THE ON-SCREEN LANGUAGE

	SETUP	1 Press [MENU] until the main menu appears.
		1 Press [MENU] until the main menu appears.
		2 Select "LANGUAGE SELECT" by pressing [PLAY] or
		[STOP]. Then, press [F.FWD].
	PLAYBACK FUNCTION	3 Select "ENGLISH" or "FRANÇAIS" by pressing
	PLAYBACK FUNCTION	[PLAY] or [STOP]. Then, press [EXIT/RESET].
		[PLAY] or [STOP]. Then, press [EXIT/RESET].

CLOCK SET UP

Set the clock accurately for proper automatic timer recording. We suggest that you use a TV or radio station as your time source.

1	Select main menu by pressing [MENU].
	(If the clock is not set, the CLOCK SET menu
	appears first. In this case, follow step [3].)
2	Select "CLOCK SET" by pressing [PLAY] or
	[STOP]. Then, press [F.FWD].
3	Set the clock.

	Set the month	Press [PLAY] or [STOP] repeatedly.
		Then, press [F.FWD].
		Press [PLAY] or [STOP]repeatedly.
	Set the day	Press [PLAY] or [STOP]repeatedly.
		Then, press [F.FWD].

PLAYBACK FUNCTION

NORMAL PLAYBACK

1 Insert the prerecorded tape. The VCR will turn on. If the safety tab has been removed, the VCR will start playback automatically.

2Turn on the TV and set the TV to channel 3 or 4. Now set the CH3/CH4 switch on the back of the VCR to match the channel selected on the TV.

3Begin playback by pressing [PLAY].

•Tracking adjustment will be set automatically (Digital Tracking function) when you start playback. To adjust

the tracking manually, press [CHANNEL () ] on the VCR.

•When a tape has reached the end, the VCR will rewind the tape to the beginning, eject the tape, and turn off the VCR automatically.

•S-VHS Quasi Playback (SQPB): This unit allows you to view a tape recorded in S-VHS format. (Noise lines may appear on the picture.)

4To stop playback, press [STOP].

STILL/SLOW

You can freeze the picture on TV screen by pressing [PAUSE/STILL] during playback.

•You can advance the picture by one frame at a time by pressing [PAUSE/STILL] during the still mode.

•If the picture begins to vibrate vertically during the still mode, stabilize the picture by pressing

[CHANNEL () ].

•If the picture is distorted or rolling vertically, adjust the vertical hold control on your TV, if equipped.

You can see the slow motion by pressing [SLOW] during playback or the still mode.

•If the noise bar appears on the TV screen, you can

reduce it by pressing [CHANNEL () ].

•After the VCR has been in Still/Slow mode for 5 minutes, it will stop automatically to protect the tape and the video head from damage.

•To return playback, press [PLAY].

AUTO REPEAT PLAYBACK

This feature allows you to play a tape over and over.

1 Select main menu by pressing [MENU].

2 Select "AUTO REPEAT" by pressing [PLAY] or [STOP].

3 Begin auto repeat playback by pressing [F.FWD] so that [ON] appears next to "AUTO REPEAT".

• If the on-screen menu still remains, press

[EXIT/RESET] to exit the menu.

Set the year

Set the hour

Set the minute

Set the AM

Press [PLAY] or [STOP] repeatedly. Then, press [F.FWD].

The day of the week will appear automatically.

Press [PLAY] or [STOP] repeatedly. Then, press [F.FWD].

Press [PLAY] or [STOP]

• To cancel the Auto repeat mode, press [F.FWD] at

step [3] so that [OFF] appears next to "AUTO

REPEAT".

• When you set the Auto repeat mode to [ON] while the

Counter memory mode is ON, the VCR will exit the

Counter memory mode automatically.

SEARCH FUNCTIONS

or PM

repeatedly.

CLOCK SET

PICTURE SEARCH

MONTH DAY YEAR 03 / 18 MON 2002

HOUR	MINUTE	AM/PM
05	: 40	PM AM
		PM

• To go back one step, press [REW].

4 Start the clock by pressing [EXIT/RESET] or [F.FWD].

If you want to skip or repeat a scene during playback, press [F.FWD] or [REW].

•Press it again and the VCR will now search in super high speed. (in the LP/SLP modes only)

– 4 –