Kenwood KTC-D500E instruction manual Selecting a station from Channel List, Erasing Channel List

Page 12

Channel Search and Channel List

Selecting a station from Channel List

Stations that are available by Auto Scan or other methods are saved in the Channel List.

1Show DVB Menu by pressing [MENU] key

2Touch [5] or [], select [CH Manager]

3Touch [3]

4Touch [5] or [], select [TV Channel List] or [Radio Channel List]

5Touch [Enter] ()

The Channel List appears and the program of the currently selected station appears in the PIG (Picture in Graphic) screen. In addition Channel Information is shown underneath the PIG screen.

6Touch [5] or [] to select a channel

When you move the cursor down the channel list, the PIG screen will change accordingly.

7Touch [Enter] ()

The received channel is switched.

Erasing Channel List

Erase channels registered in the Channel List.

1Show DVB Menu by pressing [MENU] key

2Touch [5] or [], select [CH Manager]

3Touch [3]

4Touch [5] or [], select [Erase All

Channels]

5Touch [Enter] ()

A confirmation message appears.

6Touch [Enter] ()

All channels in the Channel List are erased.

After Deleting all the Channels pressing TV Channel List or Radio Channel List will cause a message box to be displayed: No TV Channel List or No Radio Channel List.

12 KTC-D500E

Image 12
Contents KTC-D500E Contents Safety precautions 2WARNINGMonitor units that can be connected to this unit Unit with RCA video inputSwitching to Digital TV Screen Getting StartedFunctions During Digital TV Screen Functions During Digital Touch Operation TV Screen 7 for the Functions While Displaying Control Screen Select a channel Channel Number Display EnglishControl Panel is displayed in a floating Position of the TV picture FunctionsBasic Operation When connected with LZ-760R Ç Functions While Displaying the Control ScreenDisplaying EPG Viewing the Program GuideChannel Search and Channel List Searching for currently available station Auto ScanManually Searching Station Manual Search Available stations TV/Radio are saved in the Channel ListSelecting a station from Channel List Erasing Channel ListSetup System SetupSetting the Clock Clock Setting menu appearsUpdating the Software Restoring to Factory Default Restore this units settings to factory defaultSetting CA Control Information and ConaxDisplaying Information This function is not available unless a card is inserted Remote Control Unit Powers the STB unit on and offSetup Opens the Electronic Program GuideLoading battery List of Accessories Installing the Digital TV Tuner Vehicles audio board commercial productInstalling and Connecting the Remote Control Receiver Inserting Pay Card Connect the monitor and power as follows ConnectionSpecifications TV tunerGeneral Type ×