Standby Button | Jwin JD-VD518 instruction

V10M10_IM_EN_12212007

2.DOWN SAMPLING: Choose ON or OFF.

a.ON: The system will decrease a sampling rate for high sampling rate audio (more than 96K).

b.OFF: Default. High sampling rate audio can be played

Press the [STANDBY] button to turn on this unit. The main unit must be connected to the power supply.

These buttons are used to input the time, as well as title, chapter and track numbers.

When a numeric item is displayed on the screen, press the 0-9 keys to select the desired entry, and press the [ENTER] button to confirm.

When a VCD is playing (with PBC off), press the 0-9 keys to select a track directly.

Press the [DIRECTION] buttons to move the selected bar or cursor on any menu to your selection.

3.SMART SOUND: Select different music effects while listening to music.

[ENTER] Button

Press the [ENTER] button to confirm your selection

To eject the disc tray, press the [OPEN/CLOSE] button. To close the disc tray, press the [OPEN/CLOSE] again.

Press the [PLAY/PAUSE] button to play back a disc in the stop mode. Press the [PLAY/PAUSE] button to resume the playback in the pause mode.

OPEN /

PLAY/PAUSE

4.MISC SETUP: Select MISC to reset the setup data to factory settings and re-load disc.

	[STOP] Button	STOP
	While playing back a DVD, CD or VCD, press the [STOP] button once to
	stop the playback. To resume the playback at which you stopped, press

	the [PLAY] button. Press the [STOP] button twice in the playback mode to
	completely stop.
	[XX] FWD Button	FWD
	While playing back a DVD, CD or VCD, press the [XX] button to play
	back the video or audio contents fast forward.	XX
	Press the [PLAY] button to resume the normal playback.
	[WW] REV Button	REV
	While playing back a DVD, CD or VCD, press the [WW] button to play	REV

	back the video or audio contents fast backward.	WW
	Press the [PLAY] button to resume the normal playback.	WW
	Press the [PLAY] button to resume the normal playback.

Jwin JD-VD518 instruction manual Standby Button