STEP 1 |
For detailed setup information,
please refer to your User’s manual.
Hardware Installation
NOTE: Please turn off the computer’s power prior to installing the QLR Capture Card. If you are unfamiliar with installing PC hardware, it is recommended to have a PC technician perform the installation.
1.Using a screw driver remove the screws from the cover of your computer.
2.The picture shown is of a computer with its cover removed.
3.Insert the PCI Capture card into an available expansion slot.
5.Slide the computer cover back on and secure it with screws using a screw driver.
4.Secure the PCI Card by tightening the screw with a screw driver.
Congratulations!
You have completed Step 1 successfully. Your computer can now support up to 4 cameras.
QLR0440 SERIES QSG_EN_R3 | Page |