LOREX Technology L204, L208 instruction manual Using the Virtual Keyboard, Camera Setup

System Setup Controls

ENG

Using the Virtual Keyboard

The Virtual Keyboard control becomes available when keyboard input is needed for entering information such as Names, Network Information, etc.

•Includes a~z, A~Z, 0~9 and Symbols: !@#$%^&*()_+{}<>?-=[];,./

•Navigate using the arrow keys ▲▼◄► on the Front Panel or Remote Control.

•Use the ENTER Button to choose the letters, numbers and symbols

•Press the Menu/Exit button once the setup is completed

CAMERA SETUP

The CAMERA SETUP controls the display settings for each Channel on the DVR.

Use the ▲▼ arrows to navigate through the

settings, and the ◄► arrows to change the values. Press the MENU/EXIT button to return to the previous menu.

CHANNEL

Switch between CH1~CH4 (L204 Series) or CH1~CH8 (L208 Series) to change the settings for the individual channel.

DISPLAY

Set the onscreen display of the camera to ON or OFF (Covert Camera). If the camera is in Covert (not displayed), it will continue to record as normal.

BRIGHTNESS

Set the brightness of the image by setting the value between 1 (darkest) to 10 (brightest). Move the slider bar left or right to change the brightness setting.

CONTRAST

Set the contrast of the image by setting the value between 1 (lowest) to 10 (highest). Move the slider bar left or right to change the brightness setting.

HUE

Set the hue of the image by setting the value between 1 (pale) to 10 (deep). Move the slider bar left or right to change the brightness setting.

SATURATION

Set the saturation of the image by setting the value between 1 (pale) to 10 (deep). Move the slider bar left or right to change the brightness setting.

23