How do I use the Remote in DVR Mode?

How do I connect DIN cameras to the system?

1.MODE: Press the Mode Button to display the Multi-Function Mode Menu.

2.POWER: Press the Power Button to turn off the Monitor Display. Press and hold the button for 3 seconds to shut down the entire system.

3.DVR: Change to DVR Mode.

4.VGA: Change to VGA Mode.

5.RETURN: Exits from a System Menu.

6.NAVIGATION/PLAYBACK: Press the Navigation Controls to move Up, Down, Left or Right in System and Mode menus. Use the Playback controls to Pause, Play, Reverse or Fast-forward the Playback in DVR Mode.

7.INFO: Displays the System Information in DVR Mode.

8.SEARCH BUTTON: Displays the Video Playback Search menu.

9.NUMBER KEYPAD: Use to switch between Cameras in live view mode.

10.VOL +/-: Increase or Decrease the volume of the camera currently broadcasting live audio.

11.DVR SETUP: Displays the DVR Setup Menu.

12.REMOTE ID: Changes the ID for the remote control to match the System ID (if changed). Use the Remote ID when using one remote to control multiple systems). To set the Remote to default, press and hold the Remote ID button for 5 seconds, then select number 1. Press the Enter and Return buttons.

13.PICTURE FRAME: Change to Picture Frame Mode.

14.COMPONENT: Change to Component Mode.

15.ENTER BUTTON: Press the Enter Button to select an option in the System Menu or Multi- Function Menu. Also displays PIP when in camera viewing mode.

16.DISPLAY: Switches the display to single, quad and multi-display views.

17.PTZ: Switches to PTZ Mode.

18.KEYLOCK: Locks all keys (except the Mode button).

19.SEQUENCE: Changes the Monitor Display to Sequence through channels (based on menu settings).

20.PIP: Displays the Component Input in the PIP Screen in the lower right corner.

21.ZOOM: Displays one channel with Digital Zoom.

22.ARCHIVE: Displays the Archive menu.

23.AUDIO CHANNEL SELECT: Switches between live audio channels (CH1~4 only). Press Audio and select Channel 1~4.