JVC AV-20FD24 manual Symptoms Possible Solutions DVD, Remote Control

SYMPTOMS

POSSIBLE SOLUTIONS

PAGE

DVD

Playback doesn’t start.	• No disc is inserted.	27
	• The disc may be dirty. Clean up the disc.	25
	• The unit cannot play CD-ROMs, etc.	–
No picture	• TV/DVD selector is not set correctly.	26
No sound	• Check the input selector of the amplifier is set properly.	–
	• The unit is in the Special playback mode.	28
	• Select the correct Audio Output position on AV amplifier.	42
Picture is distorted during CUE or	• The picture will be distorted occasionally.	–
REVIEW.
Stopping playback, search, slow-	• Some discs may not do some of the functions.	–
motion play, repeat play, or
program play, etc. cannot be
performed.
No 4:3 (16:9) picture	• The setup does not match your TV.	36
No on-screen display	• Select Display On.	36
No surround sound	• The setup does not match your stereo system.	42
The unit or remote operation key	• Turn off the unit and unplug the AC power cord for several	–
is not functioning.	minutes, then replug it.
Playback does not start when the	• Check the RATING LEVEL setup.	38~40
title is selected.
Audio soundtrack and/or subtitle	• Multilingual language is not recorded on the DVD disc.
language is not changed when		35
you play back a DVD.
No subtitle	• Some discs have no subtitles.	33
	• Subtitles are cleared. Press SUBTITLE.
Angle cannot be changed.	• Multi-angles are not recorded on the DVD disc.	34
“ ” appears on the screen.	• The function is prohibited with the unit or the disc.	–
REMOTE CONTROL		–
The remote control does not	• Aim at the remote control at the remote sensor.
function.	• Operate within Approx. 5 Meters or reduce the light in the room.
	• Clear the path of the beam.	10
	• The batteries are weak. Replace the batteries.
	• Check the batteries are inserted correctly.

45