Tuning Channels
Automatic Tune
This TV uses automatic tuning to determine whether or not the TV can receive a broadcast signal which is being sent, and automatically prepares so that the channel selection can respond to both the position select and direct select modes.
Before Automatic Tune, Channel Select and Regional System must already be set (Refer to pages 16).
1 | AUTO TUNE | TUNING MENU |
|
| Press to select the “AUTO TUNE”. |
| |
| SYS SELECT | AUSTRALIA | |
| Press to access to the “AUTO TUNE”. | ||
| AUTO TUNE | ACCESS | |
| Search Start. | MANUAL TUNE |
|
| SOUND SYS | 5. 5 MHz | |
|
| COLOUR SYS | AUTO |
| 29 | FINE TUNE | OFF |
| CH 29 | SKIP | |
| AUTO SETUP IN PROGRESS |
|
|
| SEARCHING : PLESE WAIT | When a station is found. |
|
| STORED CH29 |
| |
| The best tuning position is automatically memorized. |
| |
| SETUP : RETURN TO TUNING MENU |
|
|
| TV/AV : TO EXIT |
|
|
2 SOUND SYS
After all stations are tuned, the
STR
Press to improve the Sound quality, if the Sound is not clear or no sound is produced on a programme Number Position.
4.5MHz 5.5MHz
6.5MHz 6.0MHz
Press to store the Sound System.
TUNING MENU |
|
SYS SELECT | AUSTRALIA |
AUTO TUNE |
|
MANUAL TUNE |
|
SOUND SYS | 5. 5 MHz |
COLOUR SYS | AUTO |
FINE TUNE |
|
SKIP | OFF |
TV/AV
Press to exit from the Tuning Menu.
This returns the set to the normal viewing condition.
Note:
When the sound volume is too small to confirm, turn it up by using the sound volume button on the remote control.
3 | Under the normal viewing condition press to enter each programme Number. |
| Confirm the tuning condition. |
If necessary, repeat step 2 for each Programme Number.
18