Panasonic PV 20DF63, PV 27DF63 operating instructions Check List, For your reference

Check List

Turn down the volume, then turn this unit, as well as other equipment to be connected, off before proceeding with connection.

Do not block ventilation holes of any equipment and arrange them so that air can circulate freely.

Read through the instructions before connecting other equipment.

Ensure that you observe the color coding when connecting audio and video cables.

Enjoying digital audio output from the digital audio output connector

Notes on audio output from the optical digital audio output connector

	Sound	Optical digital audio output
Disc	recording
		from connector
	format
		Dolby Digital bitstream
	Dolby Digital	(1-5.1 ch) or PCM (48 kHz
		sampling/16 bit only)*1
DVD	Linear PCM	Linear PCM (2ch)
	(48/96 kHz	(48 kHz sampling/16 bit
	16/20/24 bit)	only)*2
	dts	Bitstream or PCM (48 kHz
		sampling/16 bit only)*1
Video CD	MPEG 1	PCM
		(44.1 kHz sampling)
CD	Linear PCM	Linear PCM
		(44.1 kHz sampling)
MP3	MP3	Linear PCM
		(It depends on the MP3 file)
WMA	WMA	Linear PCM
		(It depends on the WMA file)

*1 The type of audio output from the connector can be selected by the Settings for DVD Operation. (See page 49.)

*2 Sound having 96 kHz sampling is converted into 48 kHz sampling when it is output from the unit’s optical digital audio output connector.

For your reference:

•Dolby Digital is a digital sound compression technique developed by the Dolby Laboratories Licensing Corporation. Supporting 5.1-channel surround sound, as well as stereo (2-channel) sound, this technique enables a large quantity of sound data to be efficiently recorded on a disc.

•Linear PCM is a signal recording format used in CDs. While CDs are recorded in 44.1 kHz/16 bit, DVDs are recorded in 48 kHz/16 bit up to 96 kHz/24 bit.

•If you have a Dolby Pro Logic Surround decoder, you will obtain the full benefit of Pro Logic from the same DVD movies that provide full 5.1 channel Dolby Digital soundtracks, as well as from titles with the Dolby Surround mark. For information on Panasonic or Technics Dolby Pro Logic Surround Sound Decoders please contact your local dealer.

IMPORTANT NOTE:

Caution for optical digital audio output connector:

•When connecting an amplifier (with an Optical digital input connector) which does not contain the Dolby Digital or dts decoder, be sure to select “PCM” at “Dolby Digital” and “PCM” at “dts” of the Settings for DVD Operation “AUDIO OUTPUT” (see page 49). Otherwise, any attempt to play DVDs may cause such a high level of noise that it may be harmful to your ears and damage your speakers.

•When a dts decoder is connected, please select “Bitstream” at “dts” of the Settings for DVD Operation “AUDIO OUTPUT.” If “PCM” is selected, there will be stereo sound. (See page 49).

•Video CDs and CDs can be played as usual.

Note

•Some dts decoders which do not support DVD-dts Interface may not work properly with the unit.

Manufactured under license from Digital Theater Systems, Inc. US Pat. No. 5,451,942, 5,956,674, 5,974,380, 5,978,762 and other world-wide patents issued and pending. “DTS” is a registered trademark of Digital Theater Systems, Inc. Copyright 1996, 2000 Digital Theater Systems, Inc. All rights reserved.

Manufactured under license from Dolby Laboratories. “Dolby” and the double-D symbol are trademarks of Dolby Laboratories.

Initial Setup

15