Orion TV/DVD-1432 owner manual Watching TV program, How to select TV program

Watching TV

You can watch TV program in a preset channel.

Watching TV program

How to select TV program

				Select the desired program
				1 Using "Program number" buttons
1	2	3	4	Directly enter the channel number with the numeric keypad
				on the remote control.
5	6	7	8	To select channel numbers from 10 ~ 99 press [-/--] button
				and enter the two digit channel number
9	0			To select channel numbers from 100 ~ 218 press [-/--] button
				twice and enter the 3 digit channel number

			2 Using the P+/- buttons
			Press the P+ button to increase channel number.
			Press the P- button to decrease channel number.
	P+		Select the desired sound
V-	MENU	V+	Press the V-/+ buttons on the remote or the front of the TV
			set to adjust the volume level. The range is 0~100. When the
	P-		volume buttons are pressed the volume level is displayed
			automatically on the TV screen.
	TUNE		Press the TUNE button, the
			TUNE menu shown on the right	TUNE
			display on the screen.	COLOUR	AUTO
				SOUND	BG
				BAND	VHFL
				SKIP	OFF
				PROGRAM	0
				SEARCH
				FINE TUNE
	P+			AUTO SEARCH
V-	MENU	V+	If the picture colour is incorrect
			This may be due to the TV being set to the incorrect
			standard. Use P+ or P- to select Colour then the V+ /V-
	P-		buttons to change between Auto, PAL, NTSC and
			NTSC443. Press the EXIT button to save the setting.

If the picture sound is abnormal

Use the CH+/- buttons to select Sound then press the

VOL-/+ buttons to select the sound system.

In general, DK, BG will display in turn.