Emerson EWC20D4 owner manual Connecting to a Dolby Digital Decoder for DVD

CONNECTING TO A DOLBY DIGITAL DECODER (for DVD)

If using this TV/DVD to play a DVD disc in a 5.1 channel Dolby Digital surround format, the TV/DVD out- puts a DOLBY DIGITAL Data stream from its COAXIAL digital audio out jack. By hooking the player up to a Dolby Digital decoder, you can enjoy a more convincing, realistic ambience with powerful and high-quality surround sound as enjoyed in movie theaters.

Use audio coaxial digital cables available at retail for the audio connections.

Center speaker

Front speaker	Front speaker
(left)	(right)

ANT.

COAXIAL

Dolby Digital decoder	To COAXIAL DIGITAL
	AUDIO INPUT jack
Surround	Surround	Subwoofer
speaker	speaker
(left)	(right)

NOTES:

To DIGITAL AUDIO OUT (PCM/BITSTREAM) COAXIAL jack

[Fig. 7]

•Be sure to turn off the power to all components in the system before connecting another component.

•Refer to the Owner's Manuals for the components to be connected to the TV/DVD.

•If connected to a Dolby Digital decoder, set DOLBY DIGITAL to ON for audio output in the setup mode. (See page 28 to set DOLBY DIGITAL to ON.)

•Unless connected to a Dolby Digital decoder, set DOLBY DIGITAL to OFF for audio output in the setup mode. Playing a TV/DVD using incorrect settings may generate noise distortion, and may also damage the speakers.

Manufactured under license from Dolby Laboratories. “Dolby” and the double-D symbol are trademarks of Dolby Laboratories.

– 12 – EN

0C28