The remote start timer mode icon indicates that the
The VRS mode icon has no function.
The vehicle page mode icon displays when the alarm module is paging the remote. Page mode is activated when the valet switch in the vehicle is pressed and held for 4 seconds.
The full trigger shock sensor icon indicates that the shock sensor has been triggered by a hard shock.
and 
The hood/trunk open or trigger icon illuminates when the hood or trunk trigger has been activated or the hood or trunk is open, and bypasses those zones until it is closed.
The parking light icon will flash twice when armed or disarmed. The icon also flashes during WarnAway and at the beginning and end of remote start cycles.
The door open or trigger icon illuminates when the door trigger has been activated or the door is open, and bypasses that zone until it is closed.
The remote start icon indicates when the vehicle is remotely started.
The Valet® mode icon appears when the system is in Valet® mode.
The remote start safety shut down icon indicates the vehicle may be in gear or other unsafe condition inhibiting remote start operation.
The battery level icon indicates the level of power remaining in the battery.
The silent arm/disarm icon appears when the system has been armed or disarmed in the silent mode.
The full trigger alert icon illuminates when the security system has been triggered by a heavy impact, door trigger violation, optional sensor violation, or a hood/trunk trigger.
The arm icon appears when the vehicle is armed and locked. The disarm icon appears when the vehicle is disarmed and unlocked.
Celsius/Fahrenheit icon indicates the current mode of the displayed temperature either in Celsius or Fahren- heit.
© 2008 Directed Electronics. All rights reserved. | 9 |
|