Important Safety Instructions | Notes on Discs |
When the power cord or plug is damaged or frayed. If liquid has been spilled onto the
If the
If the
If the
When the video and audio of
To reduce the risk of electric shock, do not remove the cover (front or back). No
This product applies to U.S. Patent Nos. 4,631, 603, 4,577,216, 4,819,098 and 4,907,093 Li- censed for limited viewing uses only.
Handling precautions
Hold the disc by the edges so the surface will not be soiled with fingerprints. Fingerprints, dirt and scratches can cause skipping and distortion.
Do not write on the label side with a
Do not use record cleaning sprays, benzene, thinner, static electricity prevention liquids or any other solvent.
Be careful not to drop or bend the disc.
Do not install more than 1 disc on the disc tray.
Do not try to close the disc tray when the disc is not installed properly.
Be sure to store the disc in its exclusive case.
If the Surface is soiled
Wipe gently with a soft, damp (water only) cloth.
When wiping discs, always move the cloth from the center hole toward the outer edge.
If you wipe the discs using a circular motion, circular scratches are likely to occur, which will cause noise while playing.
If the disc is brought from cold to warm environment, moisture may form on the disc.
Wipe this moisture off with a soft, dry,
Improper disc storage
You can damage discs if you store them in the follow- ing places:
Areas exposed to direct sunlight. Humid or dusty areas.
Areas directly exposed to a heat outlet or heating appliance.
The player cannot play discs
DVD region code is not suitable for your player.
Maintenance
Be sure to turn the power button OFF and discon- nect the power plug before maintaining the unit.
Wipe this unit with a dry soft cloth.
If the surface is extremely dirty, wipe clean with a cloth that has been dipped in water and then wipe again with a dry cloth.
Never use alcohol, benzene, thinner, cleaning fluid or other chemicals. And do not use compressed air to remove dust.
02