Television Setup

Connecting a TV Antenna		Connecting Basic Cable
Requires a TV antenna (not included).		Requires a cable connection.
1.	Connect a VHF, UHF, or HDTV antenna to the	1.	Connect a cable to the RF INPUT on the
	RF INPUT on the television.		television.
2.	Press the SOURCE button to switch to TV	2.	Press the SOURCE button to switch to TV
	mode.		mode.
3.	Press the MENU button to access the setup	3.	Press the MENU button to access the setup
	menu.		menu.
4.	Press the ARROW () buttons to	4.	Press the ARROW () buttons to highlight
	highlight the CHANNEL icon. Press the		the CHANNEL icon. Press the ENTER button.
	ENTER button.	5.	Press the ARROW () buttons to highlight
		5.	Press the ARROW () buttons to highlight
5.	Press the ARROW () buttons to		SIGNAL TYPE. Press the ARROW ()
	highlight SIGNAL TYPE. Press the ARROW		buttons to select AIR.
	() buttons to select AIR.	6.	Press the ARROW () buttons to highlight
		6.	Press the ARROW () buttons to highlight
6.	Press the ARROW () buttons to		AUTO CHANNEL SEARCH. Press the ENTER
	highlight AUTO CHANNEL SEARCH. Press		button to begin scanning for available
	the ENTER button to begin scanning for		channels.
	available channels.

Connecting a Set-Top Box

Requires a Set-Top Box (not included).

If your Set-Top Box has an HDMI Output:

•Connect the HDMI output on the Set-Top Box to the HDMI INPUT on the television using an HDMI cable (not included).

If your Set-Top Box has a Composite Video Output:

•Connect the video output on the Set-Top Box to the COMPOSITE VIDEO INPUT on the television using an A/V RCA cable (not included). Connect the audio output on the Set-Top Box to the RCA AUDIO INPUT on the television.

If your Set-Top Box has a Component Video Output:

•Connect the component video output on the Set-Top Box to the COMPONENT VIDEO INPUT on the television using a component RCA cable (not included). Connect the audio output on the Set-Top Box to the RCA AUDIO INPUT on the television.

After connecting your Set-Top Box:

•Press the SOURCE button to switch to YPbPr 1 or 2, AV, or HDMI 1, 2, or 3 to match the connection used.

10 GPX