TELEVISION SETUP
Connecting a TV Antenna
Requires a TV antenna, not included.
1 Connect a VHF, UHF, or HDTV antenna to the TV ANTENNA on the LCD television.
2Press the SOURCE button and adjust the INPUT SOURCE to “TV”.
3Press the MENU button to access the Setup Menu.
4Press the DIRECTION () buttons to select the CHANNEL tab.
5Press the DIRECTION () buttons to select AIR/CABLE. Press the DIRECTION () buttons to select AIR.
6Press the DIRECTION () buttons to select AUTO SCAN. Press the ENTER button.
7Press the DIRECTION () buttons to select START TO SCAN. Press the ENTER button.
Connecting Basic Cable
Because the LCD television is HDTV only, basic cable can only be connected through a set- top box. Requires a basic cable connection and
1Follow the instructions for connecting a
HDMI
Connecting a Set-Top Box
Requires a
If your
1Connect the HDMI Output on the Set- Top Box to the HDMI INPUT on the LCD television.
If your Set-Top Box has an Video Output:
1Connect the Video Output on the Set- Top Box to the COMPOSITE VIDEO INPUT on the LCD television. Connect the Audio Output on the
After connecting your Set-Top Box:
2Press the SOURCE button and adjust the INPUT SOURCE to “VIDEO” or “HDMI” to match the connection.
Scanning for Channels
After connecting your TV Antenna or Basic Cable you need to scan for channels before you’ll be able to watch any television.
1Connect a TV Antenna or Basic Cable to the LCD television.
2Press the SOURCE button and adjust the INPUT SOURCE to “TV”.
3Press the MENU button to access the Setup Menu.
4Press the DIRECTION () buttons to select the CHANNEL tab.
5Press the DIRECTION () buttons to select AUTO SCAN. Press the ENTER button.
6Press the DIRECTION () buttons to select START TO SCAN. Press the ENTER button.
Your LCD television will automatically begin scanning for available channels.
NTSC analog channels will not be scanned.
CUSTOMER HELPLINE | GPX TD2420 | 9 |