How do I get my CD or DVD out of the television?
To eject a disc from the television, press the Source Button and adjust the television to DVD Mode, then press the Eject Button on the right side of the television or on the remote.
How do I reset my television?
Press the Menu Button on the top of the television or on the remote to access the television’s menu. Press the TV Navigation Buttons (▲/►/▼/◄/
Enter) to select the Setup page, then scroll down to Restore Default and press the Enter Button.
FREQUENTLY ASKED QUESTIONS
Where do I get HDTV antenna information?
The internet is an excellent starting point to get information on HDTV antenna’s. Just type “HDTV Antenna” into a search engine (Google, Yahoo, etc.).
You can also ask a representative at your local electronics store (Best Buy, RadioShack, etc.).
Why can’t I pick up channels on my NTSC tuner?
NTSC is an analogue standard which is currently being phased out as the presence of digital sources becomes more prevalent. Unfortunately, if you are experiencing this issue, you must purchase a digital converter box or upgrade your tuner.
Problem | Action |
| |
TV will not switch on. | Is the power connected? Insert the power plug. | ||
| Press the power button on the remote control. | ||
Screen appears very slowly after the power is | This can occur during normal operation as part of the screen illumination | ||
turned on. | process. If nothing happens after 30 seconds contact GPX. | ||
Screen is too bright or too dark. | Adjust the brightness or contrast in the televisions setup menu. | ||
Picture appears too large or too small on the | Adjust screen size by pressing the Wide Button on the remote control. | ||
screen. |
|
|
|
Stripes appear on the screen and it shakes. | Turn off nearby electrical goods. | ||
The screen does not move. | Press the | button. Check if the Pause button is pressed on | |
| external equipment. | ||
Screen appears, but there is no sound. | 1. | Press the MUTE button. | |
| 2. | If the audio is coming from an external source, check that the cable | |
|
| is corrected to this device properly. | |
| 3. | Check if sound terminal of external input is connected properly. | |
| 4. | Check if audio cables are connected properly. | |
|
|
| |
Remote control does not work. | 1. | Check if the mains power is on. | |
| 2. | Check that the batteries in the remote control were inserted properly. | |
| 3. | Check to see if any obstacles exist between the LCD TV and the remote | |
|
| control, remove, if any. | |
| 4. | If the batteries have no power, replace them with two new batteries. | |
|
|
|
|
CUSTOMER HELPLINE | GPX TD1510 11 |