Grundig UMS 5101 CDC manual Connecting the antenna, Connecting the loudspeakers

CONNECTION AND PREPARATION _______

R TV

				AUX IN
PTICAL	AM EXT	FM EXT	L	R	SUB WOOFER
IGITAL					OUT PUT
UT PUT
	AM	COAXIAL	L	R
	LOOP	75Ω		LINE OUT
		ANTENNA

MIN. 4 Ω
IMPEDANCE	L
SPEAKERS	L

				AUX IN
OPTICAL	AM EXT	FM EXT	L	R	SUB WOOFER
DIGITAL					OUT PUT
OUT PUT
	AM	COAXIAL	L	R
	LOOP	75Ω		LINE OUT
		ANTENNA

Connecting the antenna

1Insert the rooftop antenna in the antenna socket »FM EXT« on the stereo system.

Note:

If no rooftop antenna is available, use the auxiliary aerial supplied. This aerial provides reasonably good reception of local FM (VHF) stations.

Do not shorten the auxiliary antenna.

2Insert the wire frame antenna into the » AM EXT« terminals on the stereo system. Adjust the position of the wire aerial until reception is at its best.

Connecting the loudspeakers

1Connect the loudspeaker cables to the »SPEAKERS xRy xLy« terminals on the stereo system and the »+ INPUT –« terminals on the loudspeakers. Connect the cables labelled in red to »+«.

Connecting an external device

1 Connect the audio output sockets of the external device (for example, a television or DVD player) to the » AUX IN« sockets on the stereo system using a cinch cable.

2 Use cinch cables to connect the audio input sockets of the external device (e.g. a cassette recorder) to the » R LINE OUT L« sockets on the stereo

system.
Note:
Switch off the stereo system when connecting external devices. Make sure the
stereo channels are properly connected:	ENGLISH
R = right channel (red), L = left channel (white).

11