Grundig GLCD4000HD, GLCD4600HD manual Connect to Aerial socket, Watching VCR

-You can connect additional equipment, such as VCRs, camcorders etc. to your set. However please check with your manufacturers instruction books for specific information. Make sure all connections are made with both your set and additional appliance unplugged from the mains to avoid damaging your equipment. Here shown may be somewhat dif- ferent from your set.

1

Connect to Aerial socket

< Back panel of the set >

Connect the RF out socket of the VCR to the aerial socket on the back of the set.

Connect the aerial cable to the RF aerial in socket of the VCR.

Store the VCR channel on a desired programme number using the ‘Manual programme tuning’ sec- tion.

Select the programme number where the VCR channel is stored.

Press the PLAY button on the VCR.

2

Watching VCR

< Side panel of the set >

<Back panel of VCR >

-If you connect an S-VIDEO VCR to the S-VIDEO input, the pic- ture quality is improved; compared to connecting a regular VCR to the Video input.

-To avoid picture noise (interference), leave an adequate dis- tance between the VCR and set.

Use the INPUT SELECT button on the remote control to select AV1, AV2, AV3, AV4 or S-VIDEO.

(If connected to S-Video, select the S-VIDEOexternal input source.)

Insert a video tape into the VCR and press the PLAY button on the VCR. (See VCR owner’s manual)

8