Picture settings
1Open the menu with »MENU«.
2Select the menu item »PICTURE SETTINGS« with »V« or »Λ« and press »OK« to confirm.
– The »PICTURE SETTINGS« menu appears.
|
| 20.09.2010 |
PICTURE SETTINGS | 15:46 | |
| ||
3D Settings |
|
|
Basic Tuning |
|
|
Picture Mode | User |
|
Brightness | 50 |
|
Contrast | 100 |
|
Sharpness | 75 |
|
Colour | 65 |
|
Colour Temperature | Medium | |
Enhanced picture settings
Exit
Back
3Select the line »Picture Mode«, »Bright- ness«, »Contrast«, »Sharpness«, »Colour«, or
»Colour Temperature« with »V« or »Λ«. Select the value with »<« or »>« and press »OK« to confirm.
Notes:
7When changing the values with »<« or »>«, the screen will be split. You can see the
current picture value on the left side, the
new setting on the right side. This feature is not supported in 3D mode
7In the »PICTURE SETTINGS« menu you can also find other additional settings.
4Select the line »DNR«, »Mpeg NR«, »Vibrant Colour«, »Perfect Clear«, »Film Mode«, »Gamma«, »Dynamic Contrast«, »Dynamic Backlight«, »Backlight« or »MEMC« with »V« or »Λ«.
Select the value with »<« or »>« and press »OK« to confirm.
Notes:
7You can only select the »Mpeg NR« function on digital and AV presets.
»Mpeg NR« reduces any interference from artefacts (pixel blocks) from digital pro- grammes due to MPEG compression (such
as from DVB-T receivers or DVD players) .
7The »Film Mode« detects and processes feature films automatically for all channel sources. This means you will always receive an optimal picture.
This functions in the modi 480i, 576i and 1080i in TV playback and for other channel sources.
If the »Film mode« is switched on for pro- grammes without a feature film signal, minor problems such as picture freeze, defective subtitles or fine lines in the picture could occur .
7The function »Dynamic Contrast« adapts the contrast dynamically and optimally for the respective picture content.
7With »Dynamic Backlight«, the device opti- mally adapts the background lighting to the picture content.
7The »Backlight« can only be set manually when the function »Dynamic Backlight« is deactivated.
7»MEMC« will only appear in menus of LCD products with 200 Hz PPR Feature and LED products with 400 Hz PPR feature..
5Press »MENU« to end the setting.