Jensen JE1508 Connections, Connecting a TV ANTENNA/CABLE/SATELLITE, Connecting AN Audio Amplifier

Page 8

CONNECTIONS

CONNECTING A TV ANTENNA/CABLE/SATELLITE

To view television channels correctly, a signal must be received from one of the following sources:

-An indoor or outdoor aerial antenna

-A cable system

-A satellite system

Connecting a Digital Antenna

The tuner in this TV receives ATSC TV signals from an antenna.

This digital TV can receive standard (SDTV) and high definition (HDTV) over the air broadcasts.

Satellite, Cable, or TV antenna cable to TV ANTENNA CABLETerminal (cable not included)

Connecting an Analog Antenna or Device

The tuner in this TV can receive NTSC TV signals, analog cable signals or the RF output from a satellite receiver, VCR or cable box.

CONNECTING AN AUDIO AMPLIFIER

This connection allows you to use an audio amplifier and external speakers.

Connect the right (red) and left (white) audio OUTPUT from this unit to the right (red) and left (white) audio INPUT on your amplifier. Refer to your amplifier’s user manual for more information.

Note:

To control the audio, both the TV and the amplifier must be turned on, and the volume of the amplifier must be set above 0, or you will not hear any sound.

If you want to hear the sound from the amplifier only, press the VOL – button on the TV to decrease the volume or press the MUTE button on the remote control to turn off the sound.

8

PLV1615CS1- E2-23 JENSEN-DC.pmd

8

06/08/2007, 17:57

Image 8
Contents LCD TV Safety Precautions Placement InformationSafety Information Condensation InformationImportant Safety Instructions Table of Contents Remote Control AccessoriesUsing the Remote Control To Change the Remote Control BatteryRemote Control Reference Guide Unit Reference Guide 7 8 10 11 12 1314 15Connecting a TV ANTENNA/CABLE/SATELLITE Connecting AN Audio AmplifierConnecting a Digital Antenna Connecting an Analog Antenna or DeviceConnect to a camcorder Connecting to Devices with an S-Video OutputConnect to a VCR PLV1615CS1- E2-23 JENSEN-DC-R1.pmd 11/7/2007, 933 AM Connect to a VCR/PVR Connecting a HIGH-DEFINITION HD Source Connecting a PCUsing the AC Power Adapter Power SupplyUsing the CAR Power Adapter Mounting on the Wall InstallationRemoving the Base Stand Turning the Unit on for the First Time Using HeadphonesUnit Operation TV Setup TV ModeAV / YUV Mode PC ModeAudio Menu VGA Settings in PC ModeTV Mode AV / YUV / PC Mode Setup Menu Channel Skip SettingTime Setup Setting TV Mode AV / YUV ModeDate TimeParental Menu Caption SettingRestore Setting Parental Control Setting Trouble Shooting Guide Symptom Cause and RemedyUnit Inch IBback pageJEN.pmd 08/08/2007