Installation:
1)Cut a mounting hole in the desired location using mounting hole diagram (below) and use the four 3x20min self tapping screws provided to mount the unit.
2)Route power, speaker and antenna cables through hole and connect to unit as outlined in the Wiring Color Code diagram on the previous page.
3)After making sure connections are correct, test operation.
Specifications: |
|
Operating Voltage: | |
Output Power: | 50 Watts Total (25 Watts per Channel) |
Output Wiring: | 2/4 speaker and Headphone System |
Output Impedance: | Compatible with |
| 4 Ohm Load Min. |
Tuning Range: | |
| (FM) |
Sensitivity | (AM) less than 15uv |
| (FM) less than 2.5uv |
FM Stereo Separation: | More than 30dB |
DVD Frequency Response: | |
DVD Channel Separation: | 50dB |
DVD S/N Ratio: | 70dB |
DVD Distortion: | 0.2% |
Size- |
|
Overall Size: | 10.43”(W)x7” (H)x6.26 (D) |
| 265mm(W)x178mm(H)x159mm(D) |
Mounting Size: | 9.25”(W)x6.05”(H)x5.25”(D) |
| 235mm(W)x154mm(H)x133mm(D) |
Weight: | 3.75 lbs.(1.7 Kg) |
*Specifications are subject to change without notice.
12