Grundig 32 VLC 6110 C manual Digi Link functions on your television

Page 35

OPERATION USING EXTERNAL DEVICES------------------------------

DIGI LINK

Your television is equipped with the DIGI LINK function.

This function uses the CEC (Consumer Electronics Control) protocol.

CEC allows external devices which are connect- ed to the »HDMI« sockets by an HDMI cable (e.g. DVD player) to be operated with a remote control.

Prerequisite is that the devices connected support CEC. Read the operating manual for the external device to find out how to activate the correspond- ing function.

The DIGI LINK functions on your television

Switching on the television automatically from standby

If the »Autom. switch-on TV« function is activated (»On«), then once the external device (e.g. DVD player) is switched on, the television also switches on and the appropriate HDMI preset is selected.

Automatic selection of the HDMI preset on the television

If your television is switched on and you then switch on the external device (e.g. DVD player), the appropriate HDMI preset on the television will be selected.

Selecting the menu language

The television menu language is automatically selected on the external device (e.g. DVD player). The external device must support this function.

Switching off the external device automatically

If you switch your television to standby, the ex- ternal device (if it is switched on) will also be switched to standby.

DIGI LINK is always active on your television set.

Searching for and activating external devices

You can connect up to 11 devices with DIGI LINK functions to your television.

1Open the CEC device list with »CEC«.

– The »HDMI CEC Device List« appears.

2Start the device search with »« (red).

–The devices found are displayed in the menu.

3Select the device for operation with »V«, »Λ«, »<« or »>« and press »OK« to mark it.

–If the selected device is connected to a different input to the current one, a switch to the respective input will occur auto matically.

4Press »MENU« to end the setting.

ENGLISH 35

Image 35

Contents LCD TV Overview Setup and Safety General informationSettings Connection and preparationInformation Special settings4 English English 5 General information Special features of your television setReceiving digital channels Important notes on environmental protection Connection and preparation Connecting the antenna and power cordPlug the power cord into a wall socket Environmental note Inserting batteries into the remote controlOpen the battery compartment by removing the lid Compartment Close the battery compartment. NotePb Pr Y/AV2 Connections on the television setOptic Out AudioControls on the television set Navigation in the menus Remote control Main functionsRemote control All functions Help Initial set-up and tuning television channelsSelecting language, country and operating mode Various settingsStart the scan with »« green Tuning terrestrial television channels DVB-TTuning television channels from the cable provider DVB-C Select the line »Active Antenna Power« with »V« or »Λ«Selecting channel lists Changing the program table for the digital channelsDeleting channels Creating lists of favourites» FAV« Sorting channels in the favourite listAs from DVB-T receivers or DVD players Picture settingsSetting on the right side Sound settings Equalizer Exiting the settingSoundeffects SRS TruSurround HDBasic functions Electronic TV guide Eco modeZoom function Zapping functionChanging the picture format Image data File formatsVideo data Audio dataDevices in EN 55022/EN 55024 is not possible Connecting external data mediaFile browser Settings in the USB setup menuDivX VOD Basic playback functionsPlaying selected titles Additional playback functionsSelecting chapters on DivX files Selecting titles on DivX filesRotating pictures Selecting a track or picture in steps SkipSelecting a certain passage for playback Fast forwardAdditional functions TOP text or Flof text modeLanguage settings Opening the Settings menuTimer settings Setting the date and timeParental control settings Locking television channels Restoring the television to the default settingsUpdating software Convenience functions Changing the PIN codeDigi Link functions on your television Device operation Switching the device to standbyThis ensures that you can view digital Hdtv High definition HD ready Connection optionsConnecting external devices Changing the headphone volume HeadphonesWith an analogue TV signal Connecting the headphonesHi-fi system/AV receiver Connecting the hi-fi system/ AV receiverSetting the audio format Playing the audio signal via the HiFi systemOptions »Auto Ajust« for automatic PC configura- tion Connecting a PCSelecting presets for the PC Settings for PC modeCommon Interface CI is an interface for DVB receivers What is a Common Interface?Access control for CI module and smart card Inserting the CA module»V« or »Λ« and press »OK« to confirm Select Line »Source«»V« Select Option44 English Searching for digital terrestrial TV channels automaticallySearching for digital terrestrial TV channels manually Automatic service updateSetting all analogue television channels Tuning analogue television channelsSelecting a channel list To select the preferred settingChanging stored analogue channels Skipping television channels Exiting the settingsSelection is still possible using the number buttons Entering channel names 8 digit maximumFor digital channels only Open the menu with »MENU« Displaying signal informationService information for retailers Environmental noteTechnical data Problem Possible cause Remedy TroubleshootingBlue Neutral Brown Live Additional Information for units sold in the UK