Jensen Tools CV2017J user manual Air Cable Skip Off Current Ch Fine Auto Program, Channel setup

Page 14

Menu Functions (Continued)

Channel setup:

By pressing MENU button ,and then pressing VOL-/+ button it will bring you to Channel Setup menu. You will see the following display on TV screen.

Channel

 

Channel System

Auto

Air Cable

Air

Skip

off

Current Ch.

2

Fine

 

Auto Program

 

Follow the procedure below to select above options:

1.Press the CH(+) and CH(-) button to go up and down the menu. 2.Press VOL (+) button or VOL (-) button to select your preference.

Channel System: Press the VOL(-/+)

buttons to select the correct channel system.

 

In general, you can set it as "AUTO" AUTO,NTSC and NTSC443

 

will display in turn

 

Air Cable:

Press VOL (+) button or VOL(-) button to select Aerial Antenna

 

(VHF and UHF) or Cable Antenna (CATV) reception preference.

Skip :

Press VOL(+) button or VOL(-) button to add or delete a channel

 

from the stored memory.

Current Ch. :

Press VOL(+) button to go up and VOL (-) button to go down to set

 

the channel position. The display will show the current playing

 

channel.

 

 

Channel Coverage by Antenna:

 

Antenna Type

Channel Range

 

VHF

2-13

 

UHF

14-69

 

CATV

1-125

Fine:

If the picture and/or sound are poor, try using the FINE TUNE

 

feature. Do not use this feature unless reception is poor. Press

 

VOL (+/-) to start the Fine Tune function.

Auto Program:

Press VOL (+) button to auto program channels. This search

automatically adds only the active channels in your area to the TV's memory. It deletes any channels on which there is no broadcast or a poor signal.

Note: The Auto Search function will scan the channels on the selected antenna

input. If the TV is connected to cable, please select Cable under ' Air Cable ' sub menu.

Image 14
Contents CV2017J Precautions Important safety Instructions This Appliance to Rain or MoistureGrounding or Polarization Damage Requiring Service Installation Antenna connectionFunction Buttons and External Connections Rear panel of the TV setUsing the Remote Control CH+ VOL Menu VOLDirect Channel Access Selection Power ButtonSleep Timer Button System and Channel Display ButtonChannel +/- Select Button Volume +/- Select ButtonSystem and Channel Display Cancel Button Menu Select ButtonVideo Setup Menu FunctionsAudio Setup Timer SetupFunction Setup SetupChannel setup Air Cable Skip Off Current Ch Fine Auto ProgramCalendar CalendarParental Lock Setup Password Lock MenuParental Lock Technology Menu Functions DVD Features Advanced Playback Special Function Playback Jpeg Disc PlaybackDVD System Setup General SetupGeneral Setup Password Change Preference Parental Password DefaultReset Playable Discs Following discs can be playedDisc Protection and DVD Characteristics Compare DVD disc with other discsConnection of AV input /output terminal Troubleshooting guide To assist in location possible faults use help guide belowSpecifications Specifications