Specifications
|
|
|
|
|
Screen size, visible | 16” Wide Screen TFT LCD | 19” Wide Screen TFT LCD |
| 22” Wide Screen TFT LCD |
Screen Format | 16:9 | 16:9 |
| 16:9 |
Resolution | 1366 x 768 Pixel | 1366 x 768 Pixel |
| 1366 x 768 Pixel |
Max. contrast ratio | 500:1 | 1000:1 |
| 1000:1 |
Brightness (Typical) | 250 cd/m2 | 250 cd/m2 |
| 300 cd/m2 |
Response Time (Typical) | 8ms | 5ms |
| 5ms |
Display Colours | 16.7M | 16.7M |
| 16.7M |
Viewing Angle (Typical) | H:90˚, V:65˚ | H:170˚, V:160˚ |
| H:170˚, V:160˚ |
Power Supply | ||||
Power Consumption | 30W | 48W |
| 52W |
Standby Power Dissipation | ≤1W | ≤1W |
| ≤1W |
Colour System | PAL | PAL |
| PAL |
Sound System | BG/DK/I | BG/DK/I |
| BG/DK/I |
AV Playback | PAL/SECAM/NTSC | PAL/SECAM/NTSC |
| PAL/SECAM/NTSC |
All Models Feature: |
|
|
|
|
» Conformal coated PCB | » PVR functionality (record digital TV)** | » Closed Caption Decoder | ||
» | » Component and Composite video inputs | » Parental Lock |
| |
» Built in | » VGA port for connection to a PC | » Sleep Timer |
| |
» HDMI input for true digital connection | » |
| » Built in speakers (4W x 2) | |
» USB connection for digital media playback | » | » Wall mounting bracket included | ||
013
Troubleshooting
PROBLEM | SOLUTION |
No picture or sound | Check the power supply is plugged in and turned on. |
Picture is OK but no sound | Make sure the volume is not set to minimum or mute. Turn off the TV and turn back on. |
Remote control doesn’t work | Check the battery connection is correct. Check the batteries. Make sure no obstacles are between the sensor of the remote and TV |
No TV Signal | Check the source is set to ATV or DTV. Check the antenna signal status. |
No external video signal | Check the source is set to AV |
Picture lacks colour or is to dark | Check colour, brightness and contrast settings |
All channels lose colour intermittently | Check the antenna in case it is broken, disconnected or damaged. |
Poor reception, loss of colour | Check channel is tuned correctly |
Diagonal stripes on picture | Receiver may be affected by interference. e.g. nearby radio broadcasting transmitter or from another TV receiver. |
Ghost images appear | Antenna direction may have been changed by a storm or strong wind. Ghost images are caused from both the signal travelling |
| directly from the transmitter and a signal reflected from a hill or large building. Direction of the antenna should be chosen to avoid |
| this situation. |
USB media files don’t work Time Shift and PVR don’t work
FAT 32 formatted flash drive required. Reformat if required.
FAT 32 formatted flash drive required. Reformat if required.