![PREPARATION](/images/new-backgrounds/131263/13126317x1.webp)
PREPARATION
IMPORTANT: Do not apply pressure to the screen display TURNING ON THE TV | ||
area which may compromise the integrity of the display. | 1. Install the stand and place the TV on a solid surface. | |
The manufacturer’s warranty does not cover user abuse | ||
| ||
or improper installations. |
|
ATTACHING THE STAND
IMPORTANT: The stand of the TV must be assembled prior to usage.
1. (blanket, foam, cloth, etc.) to prevent any damage to the TV.
2.Position the base plate onto the TV neck and rotate to the right until a clicking sound is heard.
3.Attach the base plate to the TV neck using the included screw.
PREPARING YOUR LCD TV FOR WALL MOUNTING
We suggest that you keep your TV at least 2.36 inches (60 mm) from the wall to prevent cable interference. Before mounting your TV on the wall, you need to remove the stand.
For your safety, please use only with a UL listed wall mount bracket with minimum weight of the TV without stand. (Please see page 18 for the weight of the TV.)
To attach a wall mount bracket to your TV:
1.Remove the screws holding your TV to the stand.
2.Remove the stand from your TV.
3.Secure the wall mount bracket to the back of your TV using four screws (see page 18 for the size of the screws). Follow the instructions of the user manual that came with the wall mount bracket to install.
NOTE
The wall mount bracket and the screws are not included.
Min 1 m
NOTE
•Ensure that the TV is placed in a position to allow free back cover.
•To prevent any unsafe situations, no naked sources, such as lighted candles, should be placed on or in the vicinity.
•Avoid heat, direct sunlight and exposure to rain or water. The equipment shall not be exposed to dripping or splashing.
2.Connect the antenna cable or cable TV cable to the ANT IN aerial socket on the back of the TV set. See
"CONNECTING TO AN ANTENNA/CABLE WALL JACK" on page 9.
3.Remote control:
Remove the cover of the battery compartment. Insert the 2 supplied batteries (Type AAA 1.5V).
4.Power:
Plug the cord into a working power outlet.
5.Turn the TV on:
Press on the remote control or POWER button on the side control panel of the TV.
English |
7