Using the features
Press the button on the remote control to select the adjusted item.
Insert the USB device with FAT32 format into the USB connector.
1 | 2 |
3 | 4 |
1.Play or pause
2 Stop
3.Play previous text
4.Play next text
Press PLAY/PAUSE button to start timeshifting .
Time Shift function is only available in DTV mode. Press PLAY/PAUSE to pause the program, and press PLAY/ PAUSE again, the time shift program will be played. If you want to stop time shift function, press the STOP button.
You can stop the time shift program being played by pressing the STOP button.
Press EXIT button to return to the previous menu.
Using External USB
Disk For Recording
Note
The system will format the whole device and if your device size is bigger than 1GB, you can set the size which is used for time shift.
If you select all the size format for time shift, you can not do any recording.
Only have to format when you use the device for record for the first time.
Suggest the minimum device size for record is 1GB.
Bit rate:
tDevice
The system can not work normally if the USB device have the listing problem below:
tThe device has bug.
tThe device has error block.
14:30 | 15:00 |
/X
tThe device reports the unfaithful size.
IMPORTANT
tUSB device should be format as FAT32 format by your PC before insert to the USB connector.
Recording
Press RECORD button to record the program being played, and press EXIT button to make the recording interface minimum.
RECORD
[00:00:00/01:30] | 14:52:52 |
5 five The streets of SAN Francisco (384MB)
Press STOP button to stop the program recording being played.
For Playback the recorded program. Enter USB to
Select the content you recorded.
Press OK button to play the program recorded and press STOP button to stop it.