Haier LE26K800, LE55K800, LE42K800, LE47K800, LE37K800, LE32K800 Menu Operation Instruction, Osd, Tv

Basic Operation Instruction

Menu Operation Instruction

Press ''MENU'' key on the remote control or on the control panel. The TV will display the main menu.

1. Press ''Left/Right'' key on the remote control or ''VOL+/

VOL-''key on the control panel to select the adjustment	Picture Mode	Soft
	Contrast	48
sort menu, which includes 4 sorts: PICTURE, SOUND,	Brightness	48
OSD, TV.	Saturation	50
	Hue	50
2. Press ''Down''key on the remote control or ''CH-'' on the
	Sharpness	55
control panel to enter the adjustment sort menu.	Aspect Ratio	Full
	Color Temp.	Standard
3. Press ''Up/Down'' key on the remote control or ''CH+/CH-''
	Noise Reduction	Off
on the control panel to select what is needed to adjust in	Adjust	Select Menu:Exit
sort menu.

4.Press ''Left/Right'' key on the remote control or ''VOL+/VOL-''on the control panel to adjust the value or setting.

5.Press ''Menu'' key to exit the main menu when the TV displays the Main Menu; Press ''Menu'' key to return to previous menu when the TV displays the submenu; Press ''SOURCE'' key to display the signal source menu or exit signal source menu.

6.During the operation, the selections which can not be adjusted at current mode will be hidden automatically and the color of the selections will be changed into gray.

7.Menu Operation Instruction in this manual is explained according to TV mode. The operations in other modes are similar to the one in TV mode. Users can take it as reference.

PICTURE

Select to enter the PICTURE submenu. Press "Up/Down" key on the remote control or "CH+/CH-" key on the control panel to choose what you need. Press the "Left/Right" key on the remote control or the "VOL+/VOL-" key on the control panel to adjust analog value or state (see below table). ★Special Attention

1.The Hue function is available only for NTSC system.

2.The value adjusted by user, such as Contrast, Brightness, Hue, Saturation, and Sharpness will

be saved automatically by the machine as User mode. ★Remote Control Shortcut Keys

SMART P: Press SMART P key on the remote control. You can switch the function among the "Standard", "Soft", "User", "Bright" four modes .

16:9: Press 16:9 key on the remote control, you can switch the mode among the "Full, "4:3", "Subtitle","Film" four modes.

Option

Picture Mode

Contrast

Brightness

Saturation

Hue

Sharpness

Function

Select picture mode

Adjust the contrast of whole picture

Adjust brightness and blackness of whole picture

Adjust the saturation of whole picture

Adjust the hue of whole picture

Adjust the sharpness of whole picture

Description

"Standard", "Soft", "User," "Bright" four modes.

Increasing analog value increases Contrast; Decreasing analog value decreases Contrast(0-100).

Increasing analog value increases brightness; Decreasing analog value decreases brightness(0-100).

Increasing analog value increases color; Decreasing analog value decreases color (0-100).

Increasing analog value increases green; Decreasing analog value increases purple(0-100).

Increasing analog value increases definition; Decreasing analog value decreases definition (0-100).

10