Haier LR47T1, LR42T1 owner manual Aspect Ratio Control, Full Screen, Mode, Zoom, Cinema

Picture Control Functions

Palette(Color Adjustment Panel for Eye-pleasing) Press CH +/- button to select Palette for Eye-pleasing, press VOL +/- button to enter the submenu, and press CH +/- button to select "User", "Standard", "6500K", "7500K", "8500K" and "9300K" six color adjustment modes according to your personal preference for color. In general, "Standard" mode is recommended.

If you select the "User" mode, press VOL +/- button to open the Color Adjustment Panel Menu (see the right figure); press VOL +/- button to select different color standards of 2500K~15000K from warm color to cold color; select the standard bit, press CH +/- button to adjust the standard

bit in the range of -50~+50, and the original data of color bits will be automatically deleted when selecting adjustment of the standard bit.

Reset

Restoring Original State of Ex-factory.

menu

Aspect Ratio Control

Press the PIC.SIZE button the Aspect Ratio menu appearance

on the screen.

Full Screen

Choose Full Screen when you want to adjust the picture horizontally, in a linear proportion to fill the entire screen.

4:3 mode

Choose 4:3 when you want to view a picture with an original 4:3 aspect ratio, with gray bars appearing at both the left and right sides.

Zoom

Choose Zoom when you want to view the picture without any alteration. However, the top and bottom portions of the picture will be cropped.

Cinema

Choose cinema mode when you view the film picture to be altered, the top black band will disappear.

Note: If a fixed image is displayed on the screen for a long time, it image may become imprinted on the screen and remain visible.

19