Haier HL42XR1 Remove the power module, Remove the Main board, Remove the keypad control

4-5 Remove the power module

_1_ Remove the four screw indicated on the figure above by the red line.

_2_ Then remove the power module

4-6 Remove the Main board

_1_ Remove the eight screw indicated on the figure above by the red line.

_2_ Remove the Main board

4-7 Remove the remote control

Remove the one screw, take out the remote

control board

4-8 Remove the keypad control

[] Remove the two screw indicated on the figure above by blue line.

_Then remove the keypad module.

14