Installation
External Equipment Connections
External A/V Source Setup
How to connect
Connect the audio and video cables from the external equipment's output jacks to the TV input jacks, as shown in the figure.
When connecting the TV to external equipment, match the jack colors (Video = yellow, Audio Left = white, and Audio Right = red).
How to use
1.Select the input source with using the INPUT button on the remote control.
2.Press the / button to select the desired source.
3.Press the OK button to confirm.
2. Operate the corresponding external equipment.
|
|
|
| AV IN |
|
|
| AUDIO |
|
|
|
|
|
L | R | Video | L | R | ANT IN |
Camcorder
Video Game Set
DVD connection
How to connect
1.Connect the DVD video outputs (COMPONENT) to the Y Pb Pr jacks on the TV and connect the DVD audio outputs to the YPbPr Audio IN jacks on the TV, as shown in the figure.
2.If your DVD only has an
Note
If your DVD player does not have component video output, use
How to use
1.Turn on the DVD player, insert a DVD.
2.Use the INPUT button on the remote control to select Y Pb Pr mode.
3.Press Play button on external equipment for program play.
4.Refer to the DVD player's manual for operating instructions.
Component Input ports
To get better picture quality, connect a DVD player to the component input ports as shown below.
|
|
| COMPONENT IN |
|
|
|
| AV IN |
| |
| VIDEO |
| PC/DVI |
|
| AUDIO |
|
|
|
|
Y | Pb | Pr | Optical | L | R | Video | L | R | ||
| Audio In |
|
|
|
|
|
Component ports on the TV
Y
Pb
Pr
Video output ports on DVD player
Y Y
Y Y
Pb | Pr |
Cb | Cr |
PB | PR |
Note
The audio input terminal of AV IN 1 is compared with
Owner s Manual 11