HAIER 19L11A / 22L11A / 23L11 
(
)(6M16
Simple troubleshooting
Symptom | Factor | Solution | |
| 1.Antenna cable connector is |
| |
| loose, cable is damaged. | 1.Check the antenna cable connector plug whether | |
| 2.Channel setting is incorrect. | or not loose, cable whether or not perfect. | |
Snowflake speckle and | 3.Antenna cable type is not | 2.Refer to channel setting method, resetting again. | |
sound noise. | matching. | 3.Check antenna cable type(VHF/UHF) | |
| 4.Direction or position of antenna | 4.Adjust direction or position of antenna cable . | |
| cable is incorrect. | 5.Attempt to use signal amplifier. | |
| 5.Signal is weak. |
| |
TV image is better, but | TV system setting is incorrect. | Enter to "TV" menu, reset sound system again . | |
has noise. | |||
|
| ||
No image. No sound. | Power plug is loose, power | 1.Check power cord whether or not connect well. | |
2.Check if the machine is on standby. | |||
cord don't connect well. | |||
| 3.Check if the power switch button is on | ||
|
| ||
TV image have stripe. | Signal is exposed to disturb, | Don't use electric blower around machine, adjust | |
such as car, neon light, electric | |||
antenna cable direction to reduce disturb. | |||
| blower etc. | ||
|
| ||
| 1.TV signal is reflected by valley | 1.Use high directional antenna cable. Use FINE | |
TV image have shadow. | or building. | ||
TUNING of "TV". | |||
| 2.Toward direction of antenna | 2.Adjust toward direction of antenna cable. | |
| cable is incorrect. | ||
|
| ||
No color. | 1.Color saturation is too low. | 1.Enter "PICTURE" to add up color saturation. | |
2.Color system is incorrect . | 2.Enter "TV" to change color system. | ||
| |||
| 1.Volume setting is too low. | 1.Adjust volume to proper value. | |
| 2.Press "MUTE" button on remote control to | ||
TV no sound. | 2.Sound is muted. | ||
eliminate mute. | |||
| 3.Sound system is incorrect. | ||
| 3.Enter "TV" to change sound system. | ||
|
|
29